VIP member
Microscope optical system - reflector
At the beginning, due to the incomplete popularity of electric light sources, microscopes generally used natural light for observation
Product details
At the beginning, due to the incomplete popularity of electric light sources, microscopes generally used natural light for observation.
2px'>
But due to the insufficient intensity of natural light, a reflective mirror is produced. The general microscopereflectorIt is a double-sided mirror that can rotate freely, with a diameter of50mmOne side is a flat surface and the other side is a concave surface, which is used to reflect light rays from any direction through a light hole.
Flat mirror reflects lightThe ability is weak and is used when the light is strong,Concave mirror reflects lightHas strong ability and is used in low light conditions.
Reflective mirrors are usually flat mirrors on one side and concave mirrors on the other side, installed under the condenser, and can rotate freely in both horizontal and vertical directions.
The function of a reflectorIt is to direct the light emitted by the light source or natural light towards the condenser. When using a condenser, a flat mirror is generally used, and a concave mirror is used when not in use; When the light is strong, use a flat mirror, and when it is weak, use a concave mirror.
After observing under the microscope, the reflector should be placed vertically. Currently, only some basic biological microscopes are equipped with reflectors. Generally, microscopes are equipped with electric light sources, and the light intensity can be adjusted by adjusting the knob to obtain the appropriate light for observing the sample.Technical extension, welcome to log in:
&bid=26
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-