Product keywords: Hot deformation Vicat temperature tester; Vicat temperature softening point tester;

Hot deformation Vicat

Other related product links:

RBW-300 typeMicrocomputer controlled thermal deformation Vicat Martin heat resistance tester

1、 Equipment usage:

This machine is used for testing the thermal deformation temperature and Vicat softening temperature of polymer materials such as plastics, rubber, nylon, and cable materials, as well as Martin's heat resistance test. It can meet the requirements of ISO306, ISO75, GB1633, GB1634, GB1035, and ASTM1525 ASTM D648 standards.

2、 Equipment function:

This device uses an intelligent controller to control the temperature, and the temperature control effect is very ideal; The deformation measurement adopts a fusion grid high-precision dial gauge to make the measurement values more stable. Equipped with a computer, real-time display of test curves and test conditions, achieving automation of the entire test process - temperature control, deformation acquisition, process control, and automatic recording and saving of test data to form test reports. The whole machine has high quality, high reliability, and easy operation.

3、 1) Main technical parameters of hot deformation Vicat:

1. Temperature control range: Room temperature -300 ℃ (specific for temperatures exceeding 300 ℃)

2. Temperature measurement accuracy: ± 1 ℃

3. Temperature resolution: 0.1 ℃

4. Deformation accuracy: ± 0.01mm

5. Deformation measurement range: 0-2mm

6. Deformation resolution: 0.01mm

7. Test unit: 3 channels

8. Heating medium: Methyl silicone oil or transformer oil, etc

9. Cooling method: Natural cooling above 100 ℃

Water cooling below 100 ℃

2) Martin's heat-resistant technical parameters

1. Temperature difference at each point inside the heating box: ≤ 2℃

2. The constant heating rate is 50 ± 3 ℃/h and 10 ± 2 ℃/12min

3. Temperature gauge accuracy: 1 ℃

4. Sample size: (120 ± 1mm) X (15 ± 0.2mm) X10 ± 0.2mm strip sample, with a thickness greater than 10mm that can be double-sided processed to 10mm

5. Test load: 50 ± 0.2kgf/cm²

6. Starting temperature of the experiment: 30 ± 10 ℃

7. Effective length of sample bending: 56 ± 1mm

4、 Configuration

1. One host

2. One set of blower device

3. One set of constant velocity heating device

4. One set of sample device

5. A set of computers

6. Deformation sensor

7. Temperature sensor

8. Three sets of hot deformation and Vicat probes each

9. Three sets of weights

10. One color inkjet printer

Microcomputer controlled thermal deformation Vicat Martin heat resistance tester