MaxxFlow HTC Bulk Solid Material Mass Flow Measurement

Application:

MaxxFlow HTCIt is a system specifically designed for measuring the flow rate of bulk solid materials, with no throttling device in the measuring tube. The installation requires a small amount of space,MaxxFlowHTCEspecially suitable for replacing bulky mechanical equipment such as punch flow meters or other cumbersome measurement systems.MaxxFlow HTCInstalled after mechanical conveyors such as optional feeding valves, screw conveyors, pneumatic chutes, or chain conveyors.

• Various powders or particles

Mechanical conveying systems, such as chutes, chutes, or discharge pipelines

• High traffic

Product information:

1 principle

The material passes through the pipeline of the sensor, and its filling degree and velocity are detected by the sensor. Since the cross-section of the sensor is fixed, the flow rate is calculated by the formula: flow rate=Filling degree*speed*Cross sectional area, and finally the flow signal passes through the standard4-20mAsignal output

2Output

two-way4-20mAOutput, load resistance<500Ω；

Relay maximum250AC，1A

3System composition

A complete measurement system consists of the following units:

Measurement sensors that need to be installed after the conveying equipment

• ConverterMFE 100

Converter through4Connect the shielded cable to the sensor

4Installation and Examples

On site photos：

5Advantages

No throttling components, no measurement blind spots.

• Does not affect the layout of pipelines (vertical or inclined)

• Easy to modify

• Dustproof

• Non contact measurement (without mechanical components)

• Maximum pressure10bar

accuracy3%