The wet forming hydraulic press for magnetic materials is a newly designed and manufactured electromechanical instrument integrated product based on the digestion of advanced technologies at home and abroad, combined with the characteristics of China's magnetic materials industry. The main cylinder stroke speed of this complete set of press adopts multi-stage speed regulation, and users can adjust it according to their own product characteristics, so as to control the forming thickness of the product within the range required by the process. The press machine consists of a main engine, hydraulic system, pump station, electrical control system, automatic feeding mechanism, demagnetization system, and automatic feeding interface with a limit of 125C. It can be widely used in various permanent magnet ferrite material production factories to produce high-performance wet pressure permanent magnet ferrite magnetic products in circular, tile shaped, block shaped, and various irregular shapes.

Model parameters:
Nominal pressure 1250KN
Top output 1000KN
Top cylinder retraction force 450KN
The maximum working pressure of liquid is 25MPa
The maximum stroke of the slider is 450mm
The maximum stroke of the lower piston is 150mm
The maximum distance between the slider and the workbench is 1450mm
Sliding block travel speed: Rapid descent ≥ 80mm/s, deceleration descent 6mm/s, rapid compression 0.4-3mm/s
Slow pressing 0.1-1mm/s, return 50mm/s
The running speed of the lower piston is pushed out at 25mm/s and retracted at 50mm/s. The effective area of the worktable is about 1000mm, and the front and back are 700mm
The center distance of the column is 1100mm from left to right and 500mm from front to back
The workbench is 500mm above the ground
The machine occupies an area of 3270mm on the left and 2600mm in the back and forth
3830mm above ground level
Motor power 6.5kw
Weight ≈ 4300kg