The vibration mill uses the excitation torque generated by the eccentric block on the transmission shaft to cause high-frequency vibration of the cylinder, relying on the strong impact and grinding effect of the grinding medium to crush the material. Vibration mill utilizes the high-frequency vibration of a cylinder, and the steel ball or steel rod medium in the cylinder relies on inertial force to impact the material. The acceleration of the medium when impacting the material can reach 10g-15g. Therefore, it has the advantages of compact structure, small volume, light weight, low energy consumption, high output, concentrated grinding particle size, simplified process, simple operation, convenient maintenance, and easy replacement of lining medium.

The MZD series single tube vibration grinder is mainly composed of a chassis, a body bracket, a soundproof cover, a body, a grinding cylinder, an exciter, a lining plate, an elastic material, a grinding medium, and a drive motor.

1. The chassis and body bracket support the body elastically through elastic support

2. The soundproof cover is used to block the noise emitted by the grinder during operation, in order to reduce the impact of noise on the entire work area.

3. The body is fastened with a grinding cylinder, and an exciter is installed on or below the grinding cylinder.

4. The grinding cylinder is the working body of the vibrating mill, used to contain the grinding medium and abrasive.

5. The exciter is used to convert the rotational torque of the motor into periodic vibration of the mill.

6. The lining plate is tightly attached to the inner wall of the grinding cylinder to protect it. When vibrating and grinding materials inside the grinding cylinder, there is also significant wear on the inner wall of the grinding cylinder. Installing an easily replaceable lining plate inside the grinding cylinder can improve the service life of the entire machine.

7. Elastic support is used to keep the grinding machine body in an elastic state and basically isolate the vibration impact on the base when the body vibrates.

8. Grinding medium is the grinding theme of the grinder, used for impact grinding of materials.

9. Drive the motor to provide energy for the vibration grinding of the mill.

The MZD series vibration mill is driven by a motor through a spindle to rotate the exciter, generating sufficient excitation force to cause the mill body to enter a cyclic vibration state. The oscillation force is continuously transmitted to all the materials loaded into the grinding cylinder (grinding medium and ground material), and the ground material is vibrated and ground through the mutual impact between the grinding medium and the ground material.

The MZD series vibration mill is a small and medium-sized non explosive material grinding equipment, mainly used for fine and ultrafine material grinding in industries such as metallurgy, mining, building materials, refractory materials, abrasives, glass, ceramics, etc. It is widely used in the ultrafine processing of raw materials, especially in the production of chemical dyes, special ceramics, powder metallurgy, and advanced refractory materials. The MZD series vibration mill produces a variety of materials with particle sizes ranging from medium (0.3mm) to finer (0.043mm). It has high production capacity and good grinding performance. The best vibration mill materials are feldspar, magnesium, manganese, graphite, etc. Among them, graphite and other materials with similar properties have ideal grinding effects.

Carbon steel vibration mill

Stainless steel vibration grinding picture