VIP member
MSA25LS
Advantages and features: Yintai linear slide rail MSA25LS belongs to the high assembly square elongated series products, with a combination height of
Product details
Advantages and Features:Yintai linear slide rail MSA25LS belongs to the high assembly square elongated series products, with a combination height of 40 and a slider mounting hole size of 35 * 50. The patented synchronous coupling is designed with oil storage space in the middle interval, which can supply lubrication needs for steel balls during operation.
| model | Dimensions (mm) | Slide size (mm) | |||||||||||||
| height H |
width W |
length L |
W2 | H2 | B | C | S×L | L1 | T | N | G | K | d1 | nozzle specification | |
| MSA25LS | 40 | 48 | 100.6 | 12.5 | 6.5 | 35 | 50 | M6×8 | 78 | 10 | 10 | 12 | 5.8 | 3.3 | G-M6 |
| model | Slide size (mm) | Basic rated load | Allowable static moment | weight | ||||||||||
| width W1 |
height H1 |
pitch P |
E std. |
D×h×d | Dynamic load C kN |
Static load Co kN |
Mp kN-m |
My kN-m |
Mr kN-m |
slider kg |
guide rail kg/m |
|||
| single | double | single | double | |||||||||||
| MSA25LS | 23 | 22 | 60 | 20 | 11×9×7 | 34.4 | 56.6 | 0.67 | 3.52 | 0.67 | 3.52 | 0.63 | 0.68 | 3.4 |
Installation requirements for Yintai slide rail MSA25LS
A guide rail, like a guide rail, has two basic components; One serves as a fixed component as a guide, and the other is a moving component. Due to the fact that linear guides are standard components, for machine tool manufacturers, the only thing they need to do is to process a plane for installing the guide rails and adjust the parallelism of the guide rails. Of course, in order to ensure the accuracy of the machine tool, a small amount of scraping and grinding on the bed or column is essential, and in most cases, installation is relatively simple.
Place two equal height measuring blocks and a marble ruler on the installation base, and use a precision level to adjust the base level. The requirement is that the base should be convex (2-3 grids) in the middle.Yintai slide rail MSA25LSInspection of the roughness, flatness, straightness, and appearance of the installation base surface.
After the horizontal adjustment is completed, the installation base of the main guide rail must be measured using a laser interferometer. We usually use a straight guide rail surface near the right column as the main guide rail. The flatness of the main guide rail is allowed to protrude by 0.05mm every 10m, and the straightness of the entire stroke is allowed to protrude by 0.03mm. The roughness requirement is 1.6, and the appearance should have no casting defects.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-