VIP member
MPP power threading pipe production line
Product Introduction: MPP power pipes are mainly used for manufacturing 110mm-250mm non excavation power pipes for the State Grid. The equipment mainl
Product details
Product DetailsOnline ordering
Performance and Structure
MPP power pipes are mainly used to manufacture 110mm-250mm non excavation power pipes for the State Grid. The equipment mainly adopts a 75 high-speed single screw extruder, and the motor adopts a 110kW AC motor combined with a frequency converter
Funcitions and Construction
This production line is mainly composed of taper Single screw extruder or double-screw extruder, vacuum sizing tank, pray-cooling tank, tractor, cutter, stacker, After being equipped with different-sized dies, it can produce various-sized PE, PVC tubing for water supply, drainage, chemical anticorrosion, electrical wiring etc.
Main technical parameters
| Project Item | Φ63 | Φ160 | Φ250 | Φ315 | Φ450 | Φ630 | Φ800 |
| Production pipe specifications (mm) | Φ16-Φ63 | Φ75-Φ160 | Φ125-Φ250 | Φ180-Φ315 | Φ200-Φ450 | Φ315-Φ630 | Φ450-Φ800 |
| Vacuum box length (mm) | 6000 | 6000 | 9000 | 12000 | 12000 | 12000 | 12000 |
| Vacuum degree (Mpa) | -0.03~-0.08 | -0.03~-0.08 | -0.03~-0.08 | -0.03~-0.08 | -0.03~-0.08 | -0.03~-0.08 | -0.03~-0.08 |
| Traction speed | 3-15 | 1-8 | 0.5-4 | 0.5-3 | 0.3-2 | 0.2-1.4 | 0.2-1 |
| Effective traction length (mm) | 1400 | 1800 | 2000 | 2200 | 2200 | 2200 | 2200 |
| Compressed air capacity (m ³/h) | 0.4 | 0.6 | 1.0 | 1.2 | 1.5 | 2.0 | 2.0 |
| Water consumption (m ³/h) | 5 | 6 | 7 | 8 | 9 | 12 | 15 |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-