Apogee MP-200 handheld pyranometer adopts a split design of recorder and total radiation probe, equipped with a 2m cable, which can meet your needs for use in small spaces or other special environments. At the same time, the total radiation probe equipped on MP-200 also has waterproof capability, which can be used normally even in rain or underwater. With the AM-310 or AM-320 handheld probe, you can easily extend the sensor probe underwater or remotely for real-time measurement.
You can also choose AL-210 and AL-100 stainless steel leveling brackets for the MP-200. The former is used to place the MP-200 recorder, while the latter is used to place the total radiation probe. Both are equipped with horizontal bubbles and 3 leveling screws, allowing you to easily complete the leveling operation without any tools.
|
MP-100 |
MP-200 |
spectral range |
360nm~1120nm |
|
range |
0~1999 W/m2 |
|
Calibration uncertainty |
<3%(1000W/m2When) |
|
repeatability |
<1% |
|
Unstable (long-term drift) |
<2%/year |
|
Nonlinear |
<1%(≤1750W/m2) |
|
response time |
<1ms |
|
angle of view |
180° |
|
directional response |
±5%(75 ° zenith angle) |
|
Temperature response |
0.04±0.04%/℃ |
|
work environment |
0~50℃, 90% non condensing environment; Separate probe 30m waterproof |
|
Recording mode |
Manual/Automatic |
|
Record capacity |
99set of data |
|
power supply |
CR2320Button battery x 1 |
|
Probe size |
—— |
Diameter 24mm x Height 33mm |
Length |
—— |
2m |
weight |
150g |
180g |