VIP member
Liquid crystal display metal tube float flowmeter, gas flowmeter
The liquid crystal display metal tube float flowmeter is suitable for measuring the flow rate of small caliber and low flow rate media; Reliable work,
Product details
Liquid crystal display metal tube float flowmeterSuitable for flow measurement of small caliber and low velocity media; Reliable work, minimal maintenance, and long lifespan; For straight pipe sectionsNot demanding; A wider flow ratio of 10:1; Dual row large LCD display, optional on-site instantaneous/cumulative flow display, canWith backlightSingle axis sensitive indication; Non contact magnetic coupling transmission; All metal structure, suitable for high temperature, high pressure, and strong corrosive mediaQuality; Can be used in flammable and explosive hazardous environments; Optional two-wire system, battery, and AC power supply methods; Multi parameter calibration powerCan; Equipped with data recovery, data backup, and power down protection functions
Technical Parameter
Measurement range: Water (20 ℃) 1-200000 l/h
Air (20 ℃, 0.1013MPa) 0.03-4000m3/h
Refer to the flow chart, special flow rates can be customized
Range ratio: Standard 10:1 Special 20:1
Accuracy: Standard Type 1.5 Special Type 1.0
Pressure rating: Standard type: DN15-DN50 4.0MPa DN80-DN200 1.6MPa
Special type: DN15-DN50 25MPa DN80-DN200 16MPa
The pressure rating of the jacket is 1.6MPa
Special types should be negotiated with the factory before selection and ordering
Pressure loss: 7kPa-70kPa
Medium temperature: Standard type: -80 ℃ -+200 ℃: PTFE: 0 ℃ -85 ℃
High temperature type: up to 400 ℃
Medium viscosity: DN15:<5mPa. s (F15.1-F15.3)
<30mPa.s(F15.4-F15.8)
DN25: <250mPFa.s
DN50-DN150: <300mPa.s
Environmental temperature: LCD type -30 ℃ -+85 ℃
Pointer type -40 ℃ -+120 ℃
Connection form: Standard type: DIN2501 standard flange
Special type: Any standard flange or thread specified by the user
Cable interface: M20 * 1.5
Power supply: Standard 24VDC two-wire 4-20mA (10.8VDC-36VDC)
Communication type: 85-265VAC 50HZ
Battery type: 36V@4AHNi-MH
Alarm output: upper or lower limit instantaneous flow alarm
Standard type: open collector output (maximum)100mA@30VDCInternal impedance of 100 ohms
Special type: Relay output (maximum contact capacity)5A@250VAC)
Pulse output: Accumulated pulse output, minimum interval of 50 milliseconds
LCD display: instantaneous flow display value range: 0-50000
Accumulated traffic display value range: 0-
Protection level: IP65
Explosion proof mark: intrinsically safe type ia Ⅱ CT6, explosion-proof type d Ⅱ CT6
Technical Parameter
Measurement range: Water (20 ℃) 1-200000 l/h
Air (20 ℃, 0.1013MPa) 0.03-4000m3/h
Refer to the flow chart, special flow rates can be customized
Range ratio: Standard 10:1 Special 20:1
Accuracy: Standard Type 1.5 Special Type 1.0
Pressure rating: Standard type: DN15-DN50 4.0MPa DN80-DN200 1.6MPa
Special type: DN15-DN50 25MPa DN80-DN200 16MPa
The pressure rating of the jacket is 1.6MPa
Special types should be negotiated with the factory before selection and ordering
Pressure loss: 7kPa-70kPa
Medium temperature: Standard type: -80 ℃ -+200 ℃: PTFE: 0 ℃ -85 ℃
High temperature type: up to 400 ℃
Medium viscosity: DN15:<5mPa. s (F15.1-F15.3)
<30mPa.s(F15.4-F15.8)
DN25: <250mPFa.s
DN50-DN150: <300mPa.s
Environmental temperature: LCD type -30 ℃ -+85 ℃
Pointer type -40 ℃ -+120 ℃
Connection form: Standard type: DIN2501 standard flange
Special type: Any standard flange or thread specified by the user
Cable interface: M20 * 1.5
Power supply: Standard 24VDC two-wire 4-20mA (10.8VDC-36VDC)
Communication type: 85-265VAC 50HZ
Battery type: 36V@4AHNi-MH
Alarm output: upper or lower limit instantaneous flow alarm
Standard type: open collector output (maximum)100mA@30VDCInternal impedance of 100 ohms
Special type: Relay output (maximum contact capacity)5A@250VAC)
Pulse output: Accumulated pulse output, minimum interval of 50 milliseconds
LCD display: instantaneous flow display value range: 0-50000
Accumulated traffic display value range: 0-
Protection level: IP65
Explosion proof mark: intrinsically safe type ia Ⅱ CT6, explosion-proof type d Ⅱ CT6
Product Selection
code
|
Measurement tube structure
|
|||||||
ZKFZ-50
|
Down in, up out
|
|||||||
ZKFZ-51
|
Down in, up out horizontally
|
|||||||
ZKFZ-52
|
Bottom horizontal in and top horizontal out
|
|||||||
ZKFZ-53R
|
Right in, left out
|
|||||||
ZKFZ-53L
|
Left in and right out
|
|||||||
|
code
|
Liquid receiving material
|
||||||
R0
|
0Cr18Ni2Mo2Ti
|
|||||||
R1
|
1Cr18Ni9Ti
|
|||||||
Rp
|
PTFE
|
|||||||
T1
|
titanium alloy
|
|||||||
Rl
|
316L
|
|||||||
|
code
|
Pipeline diameter
|
||||||
DN15
|
15
|
|||||||
DN25
|
25
|
|||||||
DN50
|
50
|
|||||||
DN80
|
80
|
|||||||
DN100
|
100
|
|||||||
DN150
|
150
|
|||||||
DN200
|
200
|
|||||||
|
code
|
additional structure
|
||||||
not have
|
|
|||||||
T
|
Jacket type
|
|||||||
Z
|
Damping type
|
|||||||
G
|
High temperature type
|
|||||||
Y
|
High pressure
|
|||||||
|
code
|
Indicator form code combination
|
||||||
M1
|
Local indicator, mechanical indication of instantaneous flow rate
|
|||||||
M2
|
Power supply type, mechanical indication of instantaneous flow rate, LCD display of instantaneous/cumulative flow rate
|
|||||||
M3
|
Power supply type, no mechanical indication, LCD display instantaneous/cumulative flow rate
|
|||||||
|
code
|
Power supply mode
|
||||||
not have
|
M1 indicator only
|
|||||||
A
|
220VAC, 4-20mA output
|
|||||||
B
|
Battery powered, no output
|
|||||||
C
|
24VDC, Two wire power supply, 4-20mA output
|
|||||||
D
|
24VDC, 3、 Four wire power supply, 4-20mA output
|
|||||||
|
code
|
Explosion proof sign
|
||||||
l
|
Intrinsic safety iaCT5 square shell
|
|||||||
d
|
Explosion proof Diibt4 enclosure shell
|
|||||||
|
code
|
Alarm or pulse output
|
||||||
not have
|
No alarm or pulse output
|
|||||||
K1
|
Upper limit alarm or one pulse output
|
|||||||
K2
|
Lower limit alarm or one pulse output
|
|||||||
K3
|
Upper and lower limit alarm or dual pulse output
|
Online inquiry