VIP member
Large mold incubator
Performance characteristics: 1. The box is made of high-pressure polyurethane molding, with excellent insulation performance and strong and reliable.
Product details
1、 Product Overview
Applicable to scientific research, universities, and production departments such as environmental protection, health and epidemic prevention, drug testing, agriculture, animal husbandry, and aquaculture. It is a specialized constant temperature equipment for water analysis and BOD determination, cultivation, preservation, plant cultivation, and breeding experiments of bacteria, fungi, and microorganisms.
2、 Performance characteristics
1. The box is made of high-pressure polyurethane molding, which has excellent insulation performance and is sturdy and reliable.
2. The exterior of the box is treated with high-quality cold-rolled steel plate spray coating, and the interior is made of brushed stainless steel inner liner. The spacing between the shelves inside the box is adjustable.
3. Using branded compressors and environmentally friendly fluorine free refrigerant (R134a), high efficiency, low energy consumption, energy-saving and environmentally friendly.
4. Microcomputer PID control, precise and reliable temperature control, minimal fluctuations, with timing function.
5. SMOOTH's overall air duct uniformity system provides more precise temperature control.
6. The vertical temperature limit alarm system has dual temperature limit protection (± 4 ℃ and upper limit 70 ℃), and automatically interrupts when the temperature limit is exceeded.
7. Reserved printer or RS485 interface, can connect printer and computer, record temperature change parameters.
8. The LED display screen, clock display, and timing function make it easy to observe the cultivation time, and the timing time can be set from 0 to 9999 minutes.
9. There is a 30mm diameter test hole on the left side of the box for easy experimental operation and temperature measurement.
10. Self diagnostic function, automatic monitoring of faults throughout the process, and intuitive indication of fault codes.
11. Equipped with a UV disinfection system, it effectively kills floating bacteria in the circulating air inside the box and prevents contamination during cell culture.
3、 Technical parameters
LRH-500A-M
LRH-500A-MS
LRH-600A-M
LRH-600A-MS
LRH-800A-M
LRH-800A-MS
LRH-1000A-M
LRH-1000A-MS
LRH-1200A-M
LRH-1200A-MS
LRH-1500A-M
LRH-1500A-MS
653
683
653
683
653
683
653
713
966
1026
966
1026
110
114
148
150
Note: 1. Model - M has no humidity control, while Model - MS has humidity control and comes standard with a humidifier
2. The mold incubator comes standard with a disinfection system
3. Performance parameter testing under no-load conditions: ambient temperature of 20 ℃, ambient humidity of 50% RH
model
Volume (L)
500
600
800
916
1070
1374
Temperature (℃)
Control range
5~65
resolution
0.1
fluctuation
± 0.5
± 0.5
± 0.8
± 0.8
± 0.6
± 0.6
Uniformity
± 0.8
Humidity (% RH)
Control range
35~90
resolution
0.1
Control accuracy
± 5~8
refrigerant
R134a
Power (W)
power supply
220VAC 50HZ
Net weight (kg)
Gross weight (kg)
Inner box size (cm)
100×45×98
108×49×100
120×55×108
120×67×114
180×55×108
180×67×114
Outer box size (cm)
107×61×160
115×65×162
127×71×170
127×83×176
187×71×170
187×83×176
Load carrier (standard)
6
6
8
10
12
15
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-