The operating room (OR) is a place that provides surgery and rescue services for patients, and is an important technical department of a hospital. The operating room should be connected to the surgical department, as well as adjacent to the blood bank, clinical care room, anesthesia recovery room, etc. Strengthen the management of the four pathways of surgical incision infection, namely: air in the operating room; Items required for surgery; The fingers of doctors and nurses, as well as the skin of patients, prevent infection and ensure the success rate of surgery. Reasonable design, complete equipment, sensitive and fast response of nurses, and efficient work efficiency are required. The operating room should have a strict and reasonable set of rules and regulations, as well as sterile operating procedures. With the rapid development of surgical technology, operating room work is becoming increasingly modernized.
Laminar ceiling is the purification air supply end of clean operating rooms and laminar flow wards, which has the functions of efficient filtration, uniform flow, and airflow compensation. The rationality of laminar ceiling structure directly affects the air supply effect and purification level of the operating room. Vertical air supply mode, made of aluminum alloy profile frame, and the box body is made of 1.2mm thick white matte PU spray coated electrolytic steel plate. The corners of the inner wall of the box and the aluminum alloy frame should have a curved transition of no less than R80mm to eliminate dead corners and prevent the growth of bacteria. Install an airtight purification lamp strip in the box, which not only has laminar flow effect but also provides illumination; Combined with the integrated purification light strip embedded in the roundabout, it ensures uniform illumination throughout the entire operating room, solving the problem of uneven illumination caused by the old model installed in large operating rooms. The damping layer is evenly distributed and adopts aluminum alloy frame one-time compression molding or buckle assembly. Screw assembly is not allowed for easy replacement and maintenance. The middle belt medium speed airflow compensation device is made of 2.0mm thick brushed anti rust aluminum plate, completely eliminating the influence of the first generation laminar ceiling on laminar flow caused by the obstruction of shadowless lamps and the weakening of airflow at the center position, which affects the laminar flow effect; Imported damping layer micropores evenly distribute airflow, with high efficiency for side delivery. Specialized laminar flow air supply ceiling for operating rooms: Stainless steel (electrolytic steel plate) laminar flow air supply ceiling has been developed in accordance with international and domestic standards and technologies, with advanced and reasonable structure and the following characteristics:
Product specifications:=1/Grade I 2600 * 2400,=2/Grade II 2600 * 1800,=3/Grade II 2600 * 1400;
B air supply form: laminar air supply ceilingHigh Efficiency FilterFull cloth air supply andHigh Efficiency FilterTwo types of side fabric air supply;
C airflow status: The airflow at the bottom of the air supply ceiling is uniform, with a full coverage rate of ≥ 95%, meeting the relevant parameter requirements of national testing;
D equal current mode: multiple mesh plate combinations, uniform airflow, electrostatic powder spraying, same color as the wall top surface, good surface effect;
Made in Factory E, assembled on site using standard connectors, easy and simple to install, with guaranteed equipment installation quality;
F maintenance operation: National standard filter, easy to replace, convenient, and easy to maintain.