1、 LCD (Liquid Crystal Display)High speed centrifuge TG16GCharacteristics and Applications

The machine casing is made of iron and has undergone spray coating treatment, resulting in good rigidity, high strength, strong corrosion resistance, and a novel and beautiful appearance. It has the advantages of low noise, low temperature rise, safety and reliability, and is suitable for experimental analysis work with small sample size and multiple separation steps. It is widely used in colleges, research institutes, pharmaceuticals, medical and other units.

This machine can be safely used in environments with temperatures ranging from 5-40 ℃, relative humidity not exceeding 80%, and no conductive dust, explosive gases, or corrosive gases in the surrounding area.

3、 Technical indicators

Equipped with rotor:

Note: If maximum speed operation is not required, please do not operate at maximum speed, as it has a good effect on machine maintenance.

4、 Operating procedures

1Place the centrifuge on a solid and flat surface, ensuring that all four legs are evenly stressed. Shake gently with your hand to check if the centrifuge is placed smoothly.

2Open the door cover, gently place the selected rotor onto the motor shaft, screw on the nut to tightly connect the rotor to the motor shaft (be careful and gentle to avoid significant left and right shaking and up and down pressure, so as not to damage the flexible support of the motor), and then gently rotate the rotor body. The rotor body should rotate flexibly, and the hanging cup (adapter) should tilt freely on the rotor body.

3After weighing the centrifuge bottle together with the solution inside the bottle (the weight error between each centrifuge bottle should be ≤2g）Put it into the hanging cup. If the rotor is configured with an adapter, weigh the adapter, test tube sleeve, and centrifuge tube containing the solution together using the same method (the weight error between each adapter should also be ≤2g）Place the rotor body behind to ensure balanced operation of the instrument.

4Close the door cover and check if it is securely locked (gently lift the door cover after closing, but it cannot be opened).

5Connect the power and press the power switch.

5、 Set operating parameters such as rotor number, speed, time, temperature, etc

(one)Display screen interface:

Power on interface:

Operating interface:

The working status is displayed separately: running, shutdown, door open.

Malfunctions are displayed separately: communication error, system error, imbalance, motor not turning, overspeed, door open

Settings interface：

Work status display: Settings

When the centrifugal unit is RPM, the highest speed is displayed under the rotor setting, and when the centrifugal unit is RCF, the maximum centrifugal force is displayed under the rotor setting

3、 Technical indicators

Equipped with rotor:

Note: If maximum speed operation is not required, please do not operate at maximum speed, as it has a good effect on machine maintenance.

4LCD high-speed centrifugeTG16GOperating procedures

1Place the centrifuge on a solid and flat surface, ensuring that all four legs are evenly stressed. Shake gently with your hand to check if the centrifuge is placed smoothly.

2Open the door cover, gently place the selected rotor onto the motor shaft, screw on the nut to tightly connect the rotor to the motor shaft (be careful and gentle to avoid significant left and right shaking and up and down pressure, so as not to damage the flexible support of the motor), and then gently rotate the rotor body. The rotor body should rotate flexibly, and the hanging cup (adapter) should tilt freely on the rotor body.

3After weighing the centrifuge bottle together with the solution inside the bottle (the weight error between each centrifuge bottle should be ≤2g）Put it into the hanging cup. If the rotor is configured with an adapter, weigh the adapter, test tube sleeve, and centrifuge tube containing the solution together using the same method (the weight error between each adapter should also be ≤2g）Place the rotor body behind to ensure balanced operation of the instrument.

4Close the door cover and check if it is securely locked (gently lift the door cover after closing, but it cannot be opened).

5Connect the power and press the power switch.

five

3、 Technical indicators

Equipped with rotor:

Note: If maximum speed operation is not required, please do not operate at maximum speed, as it has a good effect on machine maintenance.

4、 Operating procedures

1Place the centrifuge on a solid and flat surface, ensuring that all four legs are evenly stressed. Shake gently with your hand to check if the centrifuge is placed smoothly.

2Open the door cover, gently place the selected rotor onto the motor shaft, screw on the nut to tightly connect the rotor to the motor shaft (be careful and gentle to avoid significant left and right shaking and up and down pressure, so as not to damage the flexible support of the motor), and then gently rotate the rotor body. The rotor body should rotate flexibly, and the hanging cup (adapter) should tilt freely on the rotor body.

3After weighing the centrifuge bottle together with the solution inside the bottle (the weight error between each centrifuge bottle should be ≤2g）Put it into the hanging cup. If the rotor is configured with an adapter, weigh the adapter, test tube sleeve, and centrifuge tube containing the solution together using the same method (the weight error between each adapter should also be ≤2g）Place the rotor body behind to ensure balanced operation of the instrument.

4Close the door cover and check if it is securely locked (gently lift the door cover after closing, but it cannot be opened).

5Connect the power and press the power switch.