Dryers are suitable for drying, vulcanization, preheating, and curing, used for drying and curing surface layers, adjusting various materials such as plastics, rubber, drive systems, glass, ceramics, and power industry materials.

Low carbon steel furnace sleeve and frame structure;

The loading height of the dryer is 780 millimeters;

Stainless steel furnace and movable layer board;

◆ Porous adjustable plate;

◆ Manual ventilation valve;

◆ Exhaust hole at the bottom of the dryer;

Air circulation system, S60-S100 uses a circulating fan, S250-S400 uses a central circulation device;

◆ Left door, clamp buckle door;

◆ High temperature resistant insulated rope sealed door;

The heating element is installed on both sides of the dryer;

◆ Power cables for three plugs in Eastern Europe;

The internal controller of an industrial controller may store 30 control programs, each consisting of at least 15 steps, with a built-in real-time clock that can be timed on and off;

The distribution panel is installed on the left side of the dryer;

◆ Terminal security switch;

K-type thermocouple;

Non contact solid-state relay;

◆ Temperature overshoot device.

HT40AL controller with independent limit units;

◆ Manual ventilation valve;

◆ Rack;

◆ Layer board.

◆ Plot temperature recorder;

◆ Automatic control of ventilation valves;

◆ Extra layer board;

◆ Exhaust chimney;

Industrial controller;

◆ Door scope;

◆ Open the hydraulic door upwards;

The controller is connected to the computer;

◆ Relevant humidity measuring devices;

◆ METREX gas analyzer;

◆ Non standard dryer.

Durable, corrosion-resistant, and highly mechanized stainless steel furnace;

According to DIN 17052-1, a horizontal air circulation system can ensure uniform temperature circulation of air inside the furnace;

◆ Flow insulation material, low energy consumption, fast heating.