*Can simultaneously collect 14 single-phase AC currents ranging from 0 to 5A

*One IT14 can carry up to 14 low-voltage current transformers

*IT14 data can be uploaded to HMI to calculate the percentage of branch current load, and the accumulated load energy can be shared. This method is suitable for loads with consistent properties

*RS485 communication output, ModBus RTU data protocol

*DC 18~90V or AC/DC 85~265V wide voltage supply

*Rail mounted installation

*Suitable for parameter inspection systems, on-site parameter collection systems, experimental parameter analysis systems, etc

*Measurement range: AC 0～5A

*Output mode: RS485ModBus RTU communication protocol

*Accuracy level: 0.5% F.S

*Baud rate: 2400-19200bps

*Temperature coefficient: ≤ 100ppm/℃(0～50℃)

*Isolation withstand voltage: AC 1.0KV/1min (between power supply/input/output)

*Insulation resistance: ≥100MΩ(DC 500V)

*Work environment:- 10~50℃, 20~90% RH (no condensation)

*Working power supply: DC 18~90V or AC/DC 85~265V

*Whole machine power consumption: ≤ 5W