Jujube paste ultra high speed colloid millHigh shear grinding homogenizer for jujube paste, three-stage grinding homogenizer for jujube paste, SID jujube paste grinding homogenizer.

Method for making jujube paste sauce:

1Wash the big red dates, cut them open to remove the seeds and leave the jujube flesh behind

2Pour the jujube meat into the pot, add half of the jujube meat to the water, and boil over high heat

3During the cooking process, use an egg beater to continuously stir and blend the jujube meat evenly with water

4Boil until the jujube meat is mashed and the water has dried up. Turn off the heat and let it cool

5Sift the cooled jujube meat through a filter to obtain fine jujube puree, and the jujube skin can be eaten at any time (don't waste it)

6Put the filtered jujube paste into a wok, slowly heat it over low heat, and stir fry continuously

7Stir fry until the water in the jujube paste has dried up and the filling has hardened. After turning off the heat, continue to stir fry for a while to quickly release the heat

Disperse

The characteristics of this method: delicate taste

Introduction to Homogenizer XRS2000The series of grinding and homogenization equipment isXideThe company has just developed a new product through research, which is particularly suitable for materials that require one-step grinding, dispersion, emulsification, homogenization. We will modify the three-stage high shear homogenizer emulsifier by replacing the three-stage with the first stage, and then adding a colloid grinding head on top of the emulsifier head, so that the material can be first finely ground by colloid before being dispersed, emulsified and homogenized by the emulsifier. The colloid mill can be replaced according to material requirements (we provide)2P，2G，4M，6F，8SFFive types of emulsifying heads are available for customers to choose fromThe structureThe grinding homogenizer is made up of a cone mill,A high-tech product composed of homogenizers.

The level consists of three-level sawtooth protrusions and grooves with increasing precision. The stator can be infinitely adjusted to the desired distance between it and the rotor. Under enhanced fluid turbulence, grooves can change direction at each stage.

The second stage is composed of a stator. The design of the dispersing head also effectively meets the needs of substances with different viscosities and particle sizes. The main reason for the difference in the design of the stator and rotor (emulsifying head) between online and batch machines is that In terms of requirements for conveying performance, it is particularly important to note that the difference between coarse precision, medium precision, fine precision, and other types of working heads is not only the arrangement of specified rotor teeth, but also an important difference The geometric characteristics of different working heads are different. The number of slots, slot width, and other geometric features can change the different functions of the stator and rotor working heads. According to past practice, designate a job head based on past experience to fill it Provide a specific application. In most cases, the construction of the machine is tailored to the specific application, making it crucial for producing the final product.

Characteristics of XRS2000 series grinding homogenizer

1. The linear velocity is very high, and the shear gap is very small. When the material passes through, the frictional force formed is relatively intense, resulting in what is commonly known as wet grinding

2. The fixed rotor is made into a circular cone shape, with three-level sawtooth protrusions and grooves with increasing precision.

3. The stator can be infinitely adjusted to the desired distance between it and the rotor

4. Under enhanced fluid turbulence, grooves can change direction at each stage.

5. High quality surface polishing and structural materials can meet various requirements of different industries.

Grinding and dispersing machine is a high-tech product composed of colloid grinding and dispersing machines.

The first level consists of three-level sawtooth protrusions and grooves with increasing precision. The stator can be infinitely adjusted to the desired distance between the rotors. Under enhanced fluid turbulence. The groove can change direction at each level.
The second stage is composed of a stator. The design of the dispersing head also effectively meets the needs of substances with different viscosities and particle sizes. The difference in the design of the stator and rotor (emulsifying head) between online and batch machines is mainly due to the requirements for conveying performance. It is particularly important to note that the difference between coarse precision, medium precision, fine precision, and other types of working heads is not only the arrangement of specified rotor teeth, but also an important difference in the geometric characteristics of different working heads. The width of the slot and other geometric features can alter the different functions of the stator and rotor working heads.

The following is a model table for reference:

Jujube paste ultra high speed colloid mill