Ismatec low flow rate high-precision peristaltic pump IPC-N IP series

Ismatec low flow rate high-precision peristaltic pump IPC-N IP series

No need to frequently replace the pump tube
Planetary drive can reduce pulsation and extend the service life of pump tubes
-8 stainless steel rollers, smooth rotation, driving the liquid to achieve precise flow rate
-4-digit LED screen, easy to reproduce
- Simplified operation - Automatic bite chuck, providing reproducible results
- Can use 5 modes (flow rate, time, batch, drip free, and volume) for pumping or dispensing
- Run through keyboard, computer or remote control

This type of multi-channel programmable pump is equipped with planetary gears, which collaboratively drive 8 stainless steel rotors to achieve smooth rotation and precise liquid flow. The four digit LED display shows the flow rate and pump speed. Use the MAX button to instantly increase the speed for injection or flushing without interfering with the programmed settings. ||The pump tube size and material suitable for one's own application can be selected in combination. Click’n’go ™ The chuck pump is equipped with automatic blocking, which simplifies use, reduces the number of tube changes, and achieves reproducible results. Adjustable occlusion chuck pump needs to be purchased separately. Installing a chuck pump in the same direction can reduce pulsation; Installing in the opposite direction will increase the counter pressure.

The ideal choice for continuous pumping or the following five modes of allocation:

1. Flow rate: 0.0004 to 11 mL/min (depending on the size of the pump tube used)

2. By time: 0.1 seconds to 999.9 hours

3. Batch: Set the delay between allocated capacities

4. No dripping: Step by step after programming to avoid dripping

5. Capacity displayed in mL or µ L

The pump adopts analog input and output control and RS-232 interface, which can achieve computer control.

Remote control capability: Control all operational functions through RS-232 (DB9 male connector); 0 to 5 VDC, 0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, open/close and automatically start through contact closure (DB15 male connector); Foot switch (three pin DIN port). Monitor speed through analog output.

Replace the chuck:If quick replacement of pump tubing is crucial for you, please order and use additional chucks and adapters.
78001-95 Backup Click'n'go ™ chuck
78001-90 spare adjustable bite chuck
07618-71 spare adapter, which can fix dual card color pump tubes inside the chuck. Each chuck requires the use of two adapters. 12 pieces/pack