IntelligentPH/ORPTransmitterPC-3110 PC3110RS
Shangtai Instrument was established in 1982, focusing on independent research and development and manufacturing of environmentally friendly water quality analyzers and instruments. It has established its own brand and products include pH/ORP, conductivity, dissolved oxygen, ion concentration, turbidity/sludge concentration, residual chlorine and other water quality analysis instruments. Its main business scope is to act as an agent for world-renowned scientific, environmental and water quality instruments.Industrial PH Controller PC-3110, is Shangtai's flagship product, detailed introduction as follows:
96×96mmMicrocomputer design for acidity and alkalinity/redox controller |
Large LCD display screen. Display of operation status and special symbols attached |
LEDLamp indication warning, cleaning action status |
Automatic calibration: manual/Automatic selection of temperature compensation function |
Combination key to enter settings and calibration modeStyle design to prevent erroneous changes |
Provide electrode automatic cleaning device contact output, program setting output |
Provide solution grounding function to eliminate sample electrification interference |
|
measuring range |
Relay output high and low points, hysteresis can be set by any program |
resolution |
Cleaning contact ON 0-99 minutes and 59 seconds |
Instrument accuracy |
Analog output PC-3110 |
temperature compensation |
Input impedance>1012 Ω |
Storage temperature -20~70 ℃ |
Working temperature 0-50 ℃ |
Display screen backlit large LCM display |
Solution grounding can eliminate the interference of solution electrification |
Protection level IP65 |
Installation methods include wall installation, panel installation, and circular pipe hanging installation |
Power input 100-240VAC wide power supply, 50/60Hz |
Instrument size 96m × 96mm × 132mm (H × W × D) |
Hole size 93mm × 93mm (H × W) |
Weight 0.5Kg |
Note:Industrial PH Controller PC-3110,Models such as PC-3110RS-H data storage function and PC-3110RS-P PID pulse output function are available for purchase.
1. Whether the water quality contains corrosive substances, approximately the concentration; If it contains fluoric acid, an anti HF acid sensor needs to be selected;
2. Temperature, such as high temperature, requires the selection of corresponding high temperature sensors.
3. The standard distance between the sensor (electrode) and the display instrument is 10 meters. If it is extended (within 30 meters), please choose a junction box. If it is over 30 meters, please choose a signal amplifier.
Shanghai JingcanAdhere to market demand orientation, take customer needs as our responsibility, provide professional one-stop procurement solutions according to different industries of customers, and meet their needs in instrument testing, experimentation, and other aspects. Shanghai Jingcan's main businessDelger Compressed Air Quality TesterGas detection instruments, pressure calibrators, non-destructive testing instruments, optical instrumentsWater quality testing instrumentWait, customers are all over the country, among which the water quality testing equipment is from the United StatesHash portable residual chlorine tester DR300Currently in the event, welcome to purchase!
Note: The final interpretation of the event time belongs to Shanghai Jingcan Precision Machinery Co., Ltd.