1、 IHW Horizontal Pipeline Centrifugal Pump Product Overview:
IHW type horizontal centrifugal pumpA high-efficiency and energy-saving product designed and manufactured in strict accordance with the international standard ISO2858 and the new pipeline centrifugal pump standard JB/T53058-93, based on the unique structural combination of IS centrifugal pump and vertical pump. The IHW horizontal centrifugal pump is optimized and designed using advanced hydraulic models in China. At the same time, based on different usage temperatures, media, etc., hot water pumps, high-temperature pumps, chemical pumps, oil pumps, etc. are derived from the IHW type, which are currently standardized and promoted products.

2、 IHW type horizontal pipelinecentrifugal pumpProduct features:

1. Smooth operation: The excellent dynamic and static balance of the concentric impeller of the pump shaft ensures smooth operation without any vibration.

2. Drip proof: Hard alloy seals made of different materials ensure that there is no leakage during the transportation of different media.

3. Low noise: The water pump under two low-noise bearings runs smoothly, with almost no noise except for weak motor noise.

4. Low failure rate: The structure is simple and reasonable, and the key parts are equipped with international quality matching, greatly improving the fault free working time of the whole machine.

5. Easy to maintain: replace seals and bearings, simple and convenient.

6. More land saving: The exit can be arranged in three directions: left, right, and up, which is convenient for pipeline layout and installation, saving space.

7. Used for transporting clean water and other liquids with physical and chemical properties similar to clean water, suitable for industrial and urban water supply, high-rise building pressurized water supply, garden sprinkler irrigation, fire pressurization, long-distance transportation, HVAC refrigeration cycle, bathroom and other cold and warm water circulation pressurization and equipment matching, with a temperature of T ≤ 80 ℃.

8. Widely applicable to: metallurgy, chemical industry, textile, papermaking, as well as hotels, restaurants and other boiler hot water pressurized circulation transportation and urban heating systems, ISWR type uses a temperature T ≤ 120 ℃.

9. For conveying liquids that do not contain solid particles, are corrosive, and have a viscosity similar to water. They are suitable for industries such as petroleum, chemical, metallurgical, power, papermaking, food and pharmaceuticals, and synthetic fibers. The operating temperature ranges from -20 ℃ to+120 ℃.

3、 IHW type horizontal pipelinecentrifugal pumpWorking conditions:
1. The suction pressure is ≤ 1.6MPa, or the higher working pressure of the pump system is ≤ 1.6MPa, that is, the pump suction inlet pressure+pump head is ≤ 1.6MPa, and the pump static pressure test pressure is 2.5MPa. Please specify the system working pressure when ordering.pumpWhen the system working pressure is greater than 1.6MPa, it should be separately stated during ordering, so that the overcurrent and connection parts of the pump can be made of cast steel materials during manufacturing.

2. Environmental temperature<40 ℃, relative humidity<95%.

3. The volume content of solid particles in the conveyed medium shall not exceed 0.1% of the unit volume, and the particle size shall be less than 0.2mm.

Note:If the medium used is with small particles, please indicate it when ordering so that the manufacturer can use wear-resistant mechanical seals.

4、 Scope of application：

1. ISG type vertical pipelineleaveheart pumpIt is used for transporting clean water and other liquids with physical and chemical properties similar to clean water. It is suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire pressurization, long-distance transportation, HVAC refrigeration cycle, bathroom and other cold and warm water circulation pressurization and equipment matching. The operating temperature is T<80 ℃.
2IRG (GRG) type vertical heatingWater (high temperature) circulation pumpWidely applicable to: energy, metallurgy, chemical, textile, papermaking, as well as hotels, restaurants, and other boiler high-temperature hot water pressurized circulation transportation, and urban use of warm system circulation pumps. The IRG type uses a temperature T<120 ℃, and the PoGRG type uses a temperature T<240 ℃.
3. IHG type vertical pipelinechangeworkerpumpIt is used for conveying liquids that do not contain solid particles, are corrosive, and have a viscosity similar to water. It is suitable for industries such as petroleum, chemical, metallurgical, power, papermaking, food and pharmaceuticals, and synthetic fibers. The operating temperature ranges from 20 ℃ to+120 ℃.
4. YG type vertical pipelineoilpumpFor transporting petroleum products such as gasoline, kerosene, diesel, etc., the temperature of the transported medium is -20 ℃~+120 ℃.