Selection Instructions for Horizontal Fiberglass Water Tank The treatment equivalent of fiberglass sewage treatment tank is selected based on the daily discharge volume. Please refer to the parameter table of FY-HFB horizontal fiberglass sewage treatment tank for details. The sewage treatment tank should be located near the building and meet the regulatory requirements. The horizontal distance between the outer edge of the tank foundation and the outer edge of the main building foundation should not be less than twice the height difference between the two.
 |
▲ Equipment Foundation Plan |
Inspection wells should be set up before the inlet and outlet pipes of the treatment tank, and the diameter and burial depth of the inlet and outlet pipes should be determined by the user. Hospitals and "foreign-related buildings" should be disinfected or further treated after the sewage treatment tank. Our company's WSC-F sewage treatment equipment can be used to ensure that the effluent quality meets the requirements of the "GB8978-96 Comprehensive Wastewater Discharge Level 1 Standard".
 Note: Dimensions are measured in millimeters, and elevations are measured in meters. (For specific dimensions of 1 # -13 #, please refer to the parameter table of horizontal fiberglass sewage treatment tank) This diagram is a standard layout form, and users can flexibly arrange according to their respective terrains. This is a plan and elevation view of the FY-HFBR septic tank. Other drawings such as 1 # -13 # can be provided separately. The foundation needs to be designed according to the specific geological conditions of the user, with a load of 5t/m2Each embedded part A bears an upward tensile force of 3T. |