Technical features: This type of ring rolling robot has the characteristic of wide rolling range, especially for rings with ultra large diameter range.

All equipment can be manually controlled. In semi-automatic mode, the operator only controls the radial and axial rolling forces to achieve the rolling action. In automatic mode, all actions are automatically controlled. After placing the blank, press the start button, and all rolling actions will automatically proceed. After rolling is completed, return to the original point.

Fully automatic mode

By inputting parameters such as finished ring size, blank size, and rolling process code into the upper computer, the radial and axial directions of the ring can be rolled simultaneously; The entire rolling process is controlled by PLC, and the system measures the diameter, height, and position of each motion mechanism of the control ring in real time during the rolling process.

manual intervention

According to actual needs, operators can choose to control the outer diameter, inner diameter, or center diameter of the ring components. During the rolling process, operators can manually intervene in relevant parameters, and the system has rolling pause and recovery functions.

Automatic fault diagnosis

The system has a comprehensive self diagnostic function, which immediately alarms in case of equipment failure. The fault point is displayed on the upper computer, and the system can automatically adjust the equipment according to the fault level during the rolling process.