The MST-BP500 series high-temperature input liquid level transmitter is based on the principle that the measured liquid static pressure is proportional to the height of the liquid. It uses the piezoresistive effect of diffused silicon or ceramic sensitive elements to convert static pressure into electrical signals. After temperature compensation and linear correction. Convert to 4-20mADC standard current signal output.

The sensor part of the RL-BP500 series high-temperature liquid level transmitter can be directly inserted into the liquid, and the transmitter part can be fixed with a flange or bracket. The BP500 series high-temperature input liquid level transmitter produced by Jiangsu Ruiling Instrument is extremely convenient to install and use, and overcomes the limitation of only working in low-temperature environments. Welcome to inquire about the price of high-temperature input liquid level transmitters

Characteristics of High Temperature Input Type Liquid Level Transmitter

1. High precision measurement, wide range temperature compensation unaffected by foaming, deposition, and electrical characteristics of the measured medium

2. Solid state structure, no moving parts, high reliability, long service life, can be processed from water, oil to viscous paste

3. Good stability, high precision, and can work in high temperature environments

4. Directly put into the tested medium, installation and use are quite convenient

Technical parameters of high-temperature input liquid level transmitter

Measurement range: 0.3~100m (optional by the user)

Accuracy: 0.2, 0.5, 1.0 levels

● Working temperature:- 20℃~200℃

● Output signal: 2-wire 4-20mADC

Power supply voltage: standard 24VDC (12~36VDC)

● Non sensitive area: ≤ ±1.0%FS

● Load capacity: 0~600 Ω

Relative temperature: ≤ 85%

● Protection level: IP68

Explosion proof mark: Exia II CT4-6