High pressure micro mist humidifier enterprise news department report: The high-pressure micro mist humidification system is an energy-saving, clean and hygienic humidification and cooling equipment, which has been rapidly promoted in many fields and has become the best choice to replace many humidification types such as dry steam humidifiers, electric humidifiers, spray room humidifiers, etc! The system consists of a time control device, a pressurization device, a reflux device, a pressure regulating device, a filtering and water storage device, a mist drip nozzle, a T-shaped connector, a steel braided rubber hose, a humidity controller, and other components.

The high-pressure ceramic plunger pump, the heart of the high-pressure micro fog spray humidifier system, can pressurize the purified water to between 5 and 7MPa, then transfer the high-pressure water to the special micro fog nozzle through the high-pressure water pipe, and spray it into the air in the form of a 5-10 μ m (micron) cloud. The water mist absorbs heat in the air, changes from a liquid to a gaseous state, increases the humidity in the air, and reduces the air temperature at the same time. This process is an isoenthalpy humidification and cooling process. When the amount of dust in the air is large, the dust will become heavier and settle to the ground due to its combination with water vapor, which is the working principle of high-pressure micro fog system for dust reduction. At the same time, due to the extremely fine mist particles, water vapor can come into full and effective contact with air, and harmful gases in the air are also easily dissolved in water mist. This is the working principle of high-pressure micro fog systems.

The imported plunger pump pressurizes the purified clean water to 7Mpa and sends it through a high-pressure resistant pipe to a specially designed nozzle for spraying. The sprayed water mist exchanges heat and humidity with the air, causing it to vaporize and thus humidify the air. This humidification method belongs to the isentropic humidification method, which can also have a certain cooling effect while humidifying. It has the advantages of energy saving, reliability, etc. and has a high cost performance ratio.

The humidification and cooling effect of high-pressure micro fog humidifier

1. Ensure indoor humidity reaches 70 ± 5% RH (30-90% can be set arbitrarily) in any season throughout the year.

2. Mist particles with a diameter of 0.1-10 microns, do not drip or condense.

3. The humidification efficiency has been achieved.

4. Remove static electricity, flying flowers, and cotton wool. Increase yarn cotton strength, improve yarn CV value or improve printing quality.

5. A space 2.8 meters above the ground, without being affected by humidified fog that affects light and visibility.

6. Indoor cooling of 3-5 ℃; After adding a chiller and exhaust fan, the indoor temperature drops by 5-8 ℃.

7. Improve the working environment to be refreshing and clean.

Application scope: Textile, knitting, packaging printing, electronics, rubber, chemical and other fields that require large-scale humidification

Hangzhou Jiayou Industrial Co., Ltd. is committed to producing environmentally friendly and green industrial humidifiers, which are mainly used for environmental beautification, including dust removal, humidification, cooling, disinfection, static electricity removal, and other functions. Since its establishment in 2006, the company has grown from small to large in scale, relying on excellent technology, rich experience, excellent service, and good reputation to continuously develop and expand. The process of enterprise creation, improvement, and development has been completed in a short period of time, and industrial humidifier products have been sold to the national market.