High platform strapping machine_Automatic hot melt strapping machine product introduction

A strapping machine, also known as a bundling machine or strapping machine, is a machine that uses strapping tape to wrap products or packaging, then tightens and connects the two ends through thermal effect melting or using materials such as buckles. The function of a strapping machine is to ensure that the plastic tape can be tightly attached to the surface of the bundled package, ensuring that the package does not scatter due to loose bundling during transportation and storage, while also bundling neatly and beautifully. Widely used for packaging and bundling cardboard boxes, wooden boxes, wicker boxes, paper packages, and cloth packages in industries such as home appliances, hardware, plastics, electronics, food, medicine, textiles, shopping malls, postal services, and book and magazine distribution. After inserting the PP tape into the machine, the machine can automatically complete the entire bundling process of tightening, bonding, cutting, and removing the tape.

Equipment features:

Strong adaptability: It can be applied to PP tapes with a width of 6-15mm without the need to replace any parts.

Higher efficiency: Each bundle only takes 1.5 seconds to complete.

Instant heating: It will enter a good bundling state within 30 seconds after turning on the machine.

Good safety: The rapid heating system has a hot melt design and only has a low voltage of 1V.

Power saving and practical: Equipped with an automatic shutdown device, when the motor stops operating for more than 60 seconds, it will automatically stop and enter standby mode. The bottom is equipped with casters for easy mobility of the device.

Stable operation: Electromagnetic clutch, fast and smooth; Continuous shaft transmission, fast speed, low noise, minimal wear, and low failure rate.

This machine has fast working speed, high efficiency, time-saving and labor-saving packaging quality. There are two models to choose from: high platform and low platform.

Technical parameters of packaging machine:

High platform semi-automatic strapping machine, low platform semi-automatic strapping machine

Power supply voltage 110V/220V/50-60Hz Power supply voltage 110V/220V/50-60Hz

Mechanical power 0.45KW Mechanical power 0.45KW

PP strip width 6-15mm PP strip width 6-15mm

From 60mm for small packages to 60mm for small packages

Unlimited to large packages

Packing speed 1.2 seconds/piece Packing speed 1.2 seconds/piece

Tightening force 5-80Kgs Tightening force 5-80Kgs

Machine size 895X565X730mm Machine size 1490X565X460mm

Machine weight 100Kg Machine weight 80Kg