HY series horizontal single-stage piston push centrifuge

① Performance:

The HY series centrifuge is a horizontal piston push and continuous operation filtration centrifuge. At full speed operation, continuous processes such as feeding, separation, washing, and unloading are carried out.

②Structure and characteristics:

It has the advantages of continuous operation, smooth operation, easy operation, high production capacity, good washing effect, and low moisture content of filter cake.

existThe main motor drives the drum to rotate at full speedbelowThe material is continuously fed through the feeding pipeadvanceThe liquid phase is evenly distributed on the filter wall of the inner section of the drum. Under the action of centrifugal force, the liquid phase passes through the filter screen and the filter holes of the drum wall and is discharged from the drum. It is then discharged outside the machine through the casing discharge pipe, while the solid phase is trapped inside the drum, forming an annular filter cake layer. At the same time as rotating at the same speed as the drum, the pushing disc continuously moves axially back and forth under the push of the piston, pushing the filter cake layer intermittently to move towards the outer end of the drum and discharge it out of the machine from the bottom of the front casing.

③Main uses of the product:
Suitable for separating solid phase substances with particle size greater than0.1mm suspension with a concentration greater than 40%. Suitable for industries such as chemical, fertilizer, alkali production, salt production, etc., especially suitable for solid-liquid separation of ammonium bicarbonate, ammonium chloride, ammonium sulfate, saltpeter, cotton seed pickling, etc.

④Structural diagram:

Special Reminder:

1. The technical parameters are subject to the product manual.

2. When inquiring, please ask the customer to provide detailed material characteristic parameters and process condition requirements.

3. If customers have special requirements, we can adopt personalized design and manufacturing.

4. Equipment material: The material in contact with the material can be ordinary stainless steel, special stainless steel, or titanium alloy.

5. Motor: ordinary or explosion-proof single speed motor, etc.

6Selection range of filter gap width:0.1-0.4mm.