VIP member
HX-18A fully automatic PLC CNC vacuum forming machine
Model/Parameters HX-18A Suitable for Material PP
Product details
| Model/Parameters | HX-18A |
| Adapt to materials | PP,PE,PET,HIPS,GPPS、PS、PVC |
| Molding length (mm) | 710-1220 |
| Forming width (mm) | 460-710 |
| Molding depth (mm) | 150-200 |
| Molding speed (cycles/min) | 4-15 |
| Sheet width (mm) | 500-750 |
| Sheet thickness (mm) | 0.1-2 |
| Whole machine power (kw) | ≤40 |
| Gas consumption (Mpa) | 0.6-0.8 |
| Water consumption (m3/h) | ≤0.5 |
| Size specifications (mm) | L7500xW1800x2700 |
Product Introduction
Huaxiang HX-18A vacuum forming machine is suitable for vacuum forming in industries such as stationery and toys, hardware batteries, medical equipment, food and daily necessities.
characterization
Efficient and programmatic: PLC human-machine interface, capable of storing 200 sets of memory system, convenient and time-saving, more conducive to maintenance and testing.
Accurate gas saving: The pulling system uses a 3.7KW Mitsubishi variable frequency motor with digital display for stable positioning.
Stable and fixed: furnace moving device, adjustable speed of sheet entry and exit, controllable speed of furnace entry and exit,
The electric furnace function can maximize the savings of a row of heating bricks, playing a role in energy conservation. And the hot furnace has manual fine-tuning
Energy saving and environmental protection: The heating brick is embedded with insulation cotton and wrapped in a high-temperature sleeve, which makes the temperature less likely to dissipate, energy-saving, and less likely to burn out.
Automatic performance: The motor automatically loads materials and can withstand 50-100KG, saving time and labor.
Efficient and power-saving: It can be pulled about 6-20 times per minute, saving 2-4 kWh of electricity compared to ordinary machines.
Low scrap rate: automatic cow milk spray function and vacuum two-way valve function reduce the scrap rate of products.
Cost reduction: The dependence of computers on manpower is greatly reduced, which controls the production labor cost.
The time for changing the mold and adjusting the machine is only about 10 minutes, which improves work efficiency compared to the 20 minutes of other models.
Wind power increase: The left and right cooling fans use 1.1KW motors, and the air nozzles are widened to ensure that the cooling area is in place and accelerate the cooling of the mold.
Durable and wear-resistant: All air valve interfaces are connected with copper pipes, which are not prone to air leakage.
Quick slicing: The knife switch adopts a rodless cylinder, making slicing convenient and fast.
other
The 18 series is our company's flagship product, while the main differences between 18A, 18B, and 18G are temperature control methods and automation levels. This series has similar specifications but slightly different configurations.
18G: All processes are set by PLC; 18A: Manual temperature adjustment, other actions are set by PLC; 8B: Temperature control and time setting are all manually completed;
contrast
Product quotation
Chinesehttps://detail.1688.com/offer/.html?spm=a2615.2177701.0.0.620836e7J2ojJc
Foreign trade:https://hxauto.en.alibaba.com/product/
MESSAGE
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-