characteristic
1. The transmission device adopts shaft mounted reducer or flange direct connection reducer, with exquisite appearance and easy disassembly and assembly.
2. The driving wheels are equipped with automatic correction function, which can ensure that the suction dredger runs long distances without rail gnawing or climbing.
3. The suction system can be equipped with a backwash device to eliminate accidents such as pipeline blockage.
4. The pump suction or pump siphon double suction adopts an unobstructed submersible sewage pump, which starts quickly and does not require a water intake device. It is easy to operate and maintain. The connection between the submersible sewage pump and the suction system is unique. The submersible sewage pump can be lifted out of the water surface for maintenance or replacement without stopping the pool to discharge water.
5. PLC control can be used. Set the full and half operation modes of the suction machine as needed. The cycle of the suction machine can be controlled by time. It can also be equipped with a mud level gauge to detect the accumulation of mud at the bottom of the tank and operate automatically.
6. A unique sludge discharge adjustment device can be installed on the suction pipe of the siphon mud machine. The sludge discharge amount can be automatically adjusted according to the sludge concentration, saving water. Please specify this technology when placing an order.

Ordering Instructions
1. The difference between the water level in the siphon sedimentation tank or pump siphon double suction sedimentation tank and the water level at the outlet of the sludge pipe shall not be less than 2.5m (adding a vacuum breaking device to the pipeline system of HJX3 and HJX4 types is HJX5 type).
2. The number of straws is a reference value and can be adjusted according to the user's sludge discharge volume.
3. Axial flow pump suction. Please indicate the flow rate, head and other parameters of the pump. When used in an integrated circular oxidation ditch, please make sure to be careful.
4. Please indicate the need for a floating slag device.
5. For siphon type, it is recommended to use a submersible sewage pump and a water jet. Please specify if an empty pump siphon is required.
When the pool width is less than 4m, the supporting track is 12kg>4m. The supporting track is 12kg>
7. Underwater components. Please indicate the material.
8. Detailed civil engineering information and electrical control methods must be provided when placing an order.
9. Tracks, sliding wires, water collection tanks, inclined plates, etc. are required. Please specify.
10. The graphics in this product are for reference only. It is recommended to arrange the piping system according to the distribution of the user's pool type water outlet.