VIP member
HH-4、 6-row digital constant temperature water bath
HH-4、 6-row digital constant temperature water bath
Product details
Electric constant temperature water bath is used for distillation, drying, concentration, and impregnation of chemical drugs.
2、 Form:
Divided into single column and double column types
Single column
Product model: HH.1 Hole number: 1 Hole diameter: 125mm Depth: 95mm Power: 300W
HH.2 Hole number: 2 Hole diameter: 125mm Depth: 95mm Power: 600W
HH.4 Hole Number: 4 Hole Diameter: 125mm Depth: 95mm Power: 1000W
HH.6 Hole Number: 6 Hole Diameter: 125mm Depth: 95mm Power: 1500W
Double row
Product model: HH.4 Hole number: 4 Hole diameter: 125mm Depth: 95mm Power: 800W
HH.6 Hole Number: 6 Hole Diameter: 125mm Depth: 95mm Power: 1500W
HH.8 Hole number: 8 Hole diameter: 125mm Depth: 95mm Power: 2000W
Note: (1) d in the drawing is the effective size when the hole cover is fully opened.
⑵ h is the effective size from the shelf to the surface of the water bath.
3、 Structure:
This product is a sink type with a maximum mouth diameter of 12 centimeters. Each hole has four circles and a lid. The inner pot is made of a whole piece of stainless steel stamping (or welded stainless steel plate), and the outer shell is made of high-quality thin steel plate and sprayed with plastic. The electric heating tube is installed in the middle of water, which heats up quickly and consumes less power. And it is equipped with a digital constant temperature device (intelligent temperature controller), which can be operated according to the instructions of the temperature controller: the adjustment range is 0-100 ℃, ± 1.5 ℃, and the water temperature can be adjusted according to the user's needs.
4、 Usage:
When using, it is necessary to first add water to the pot (hot water can also be added according to the required temperature to shorten the heating time), turn on the power, turn on the power switch, and directly select the desired temperature on the intelligent temperature controller (KW-1000DC) according to the instructions. The temperature controller will automatically maintain a constant temperature. Work completed, cut off the power supply.
5、 Attention:
1. This product uses AC 220V mains power, and the power inlet adopts a three wire safety plug socket. Be sure to ground it safely during use to prevent electrical leakage.
2. A temperature sensor is installed inside a metal tube in the pot to transmit temperature signals. Do not collide or vibrate violently to prevent temperature failure.
3. It is strictly prohibited to heat the pot without water. The water level should be higher than the heating tube, otherwise it will burn out the electric heating tube.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-