*Used for measuring small DC currents

*Advanced sealing technology, excellent anti-interference ability, and high-precision characteristics

*Wide measurement range, strong overload capacity

*Perforated structure, no insertion loss

*The insulation between the primary and secondary sides is high, and the shell meets the UL94-V0 standard

*Suitable for DC small current measurement, current difference measurement, leakage current monitoring system, signal and line detection, etc

*Measurement range: 10mA~20A (leakage current), 50A~600A

*Output signals: ± 1V, ± 4V, ± 5V, 0-20mA, 4-20mA

*Accuracy level: 1.0% F.S

*Response time: ≤ 120ms (leakage current), ≤ 10us

*Unbalanced voltage: ＜ ± 50mV (leakage current), ± 20mV

*Hysteresis error: ± 10mV

*Temperature drift: 0.05%/℃ (leakage current), 0.025%/℃

*Isolation withstand voltage: AC 3.0KV/1min (between power supply/input/output)

*Work environment:- 10-80 ℃, 20-90% RH (no condensation)

*Working power supply: DC ± 12V, ± 15V, 24V

*Whole machine power consumption: ≤ 25mA

Sensor usage instructions

1、 Terminal wiring:
1.+Positive pole of power supply 2. - Negative pole of power supply (when powered by a single power supply, pin 2 is empty) 3. M output 4. G ground.

2、 The direction of the arrow indicates the direction of the input current.

3、 Gain regulator: calibrated according to the rated value before leaving the factory, no adjustment is required.

4、 Zero point regulator: When the online discharge current is 0, fine tune the zero point regulator to make the output value 0.