VIP member
Product details
◆ Purpose
1. Widely used in dust control of belt transportation and transfer stations for metallurgical industry, mining, coking, pellet, and sintering mixtures.
2. Widely used for dust control in coal conveyor belts (transfer stations) of coal-fired power plants.
3. Widely used for dust control during the operation of belt transportation.
◆ Technical Introduction
The HDM series dust removal equipment is a type of dust removal equipment that requires no land occupation, no secondary pollution, no dedicated personnel supervision, minimal maintenance, and low power.
The dust removal effect meets the hygiene standards for respiratory dust in the air of workplaces (GB16248-1996). It is aimed at steel mills, power plants, and mines
A new type of dust collector specially developed for belt transfer stations such as mountains and ports has overcome the conditions of high dust emissions, wide distribution, and limited space
The disadvantages of traditional dust collectors, such as large land occupation, high energy consumption, extensive maintenance, high investment, high operating costs, and secondary pollution, are due to belt transportation
Ideal environmental protection facilities for dust control in transportation stations.
◆ Working principle
During the belt transportation process, a large amount of dust is generated. When the HDM dust collector is in operation, the centrifugal fan of the dust collector is used to remove the dust from the overflow area
Create a negative pressure zone and suck the dusty gas into the dust collector. The dust collector is equipped with multiple filter bags, and when the dusty gas passes through the filter bags, the dust is blocked
The separated and purified gas is discharged through a fan. When the dust on the surface of the filter bag increases and the resistance value (or time control) reaches the predetermined value, pressure transmission occurs
The sensor sends an indication signal to the electrical control box, and the pulse spraying system controlled by PLC or pulse controller automatically sprays and attaches the filter bag
The dust on the filter bag is directly shaken off onto the belt. Always maintain good filtering performance of the filter bag, and the fork does not generate secondary dust.
Sealed soft curtains with dust blocking and suction functions are installed at the material discharge outlet and the front of the belt, effectively preventing dust from entering
Overflow on both sides of the belt and at the end of the sealing baffle.
Design and install dust removal devices based on the work of the belt conveyor head and tail, as well as the actual situation on site. At the same time, fully consider
Maintenance of belt conveyor, replacement of rollers, replacement of belts, and other related issues.
Characteristics of dust collector system
1. The one-time investment is small, and the price is relatively low compared to other dust collectors.
2. Suitable for dust removal in conveyor belt transfer station systems for coal, sintered ore, ore and other raw materials.
3. The pulse spraying of the dust collector is automatically controlled by PLC or pulse controller, which is stable and reliable.
4. The dust collected by the dust collector is directly returned to the material bin or belt, without secondary pollution, saving manpower and resources, and effectively recovering raw materials.
5. Low power consumption, low operating and management costs.
6. The nature, temperature, and selection of different filter materials of the material to ensure dust removal efficiency and service life.
7. The dust collector occupies a small area, saving space.
8. High purification efficiency, in line with national environmental protection standards, solves the problem of dust pollution caused by belt transportation and transfer.
◆ After sales service
Our company has always emphasized the after-sales service of our products. When users make specific requests, targeted solutions can be designed
Provide reference for users until they are satisfied.
After the product is sold to users, relevant personnel should be dispatched promptly for on-site service, installation, and debugging until it is delivered for use.
When equipment problems occur during operation, personnel will be dispatched to the site within 48 hours after receiving notification from the user, actively cooperating with the user to solve them
The current issue.
Free job training for operators.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-