HBP- 1Bottle type deepwater sampler

A brief introduction

HBP-1typeThe bottle type deepwater sampler is a tool for manually collecting water samples, mainly used in environmental protection, hygiene and epidemic prevention, tap water, chemical and other units. Used for collecting water samples from deep, distant, and other areas where manual collection is inconvenient.

Two main components

HBP-1The bottle type deepwater sampler mainly consists of three parts: the sampling rod and the sampling bottle,Control valve composition. The sampling rod is made of high-quality alloy material and has4Composed of sections, all manufactured as telescopic type, can be tightened through connecting joints during field operations, with a length of up to4Rice. Can be shrunk into a one meter long pole when not in use, making it easy to carry. The sampling bottle is made of high-quality materialsPVCMade of materials, lightweight, not easily damaged, with good purity, and does not affect water quality. The cable is mainly used for controlling valves.

Three configurations

(1) Four sampling rods (with scales); High quality 304 stainless steel material.

(2) 2 sampling bottles; Volume 1000ml, imported transparent PC material, with scale.

(3) Control one valve; Made of stainless steel material, embedded in the center of the sampling bottle cap.

(4) 1 cable; The cable is mainly used for controlling valves and is made of nylon material with a pull ring, measuring 600cm in length.

(5) 1 portable bag; (Waterproof, used for installing the above components, convenient for outdoor carrying)

fourUsage

（1）When working in the field, first assemble the sampling bottle onto the sampling rod.

（2）Connect the sampling rod again, there are four sections in total, and connect them through joints.

（3）After installation, water samples can be collected and equipped with two sampling bottles,Alternating use. When the sampling bottle reaches the sampling depth,Pull the valve cable,The valve opens and automatically introduces water,Release the cable after completion,The valve will automatically close.After removal,Fill the collected water into a sampling bottle