Concrete temperature measuring instrument

Our company provides first-hand supply for manufacturers.

Our company provides professional concrete temperature measuring instruments, including handheld thermometers, computer-controlled remote thermometers, concrete temperature measuring wires, etc.

The products provided by our company are all high-precision thermometers, with an accuracy controlled within 0.3 ℃. They can be used not only for concrete temperature measurement, but also for other temperature measurement purposes. The high-precision calibration is qualified.

At present, the technology level for measuring the temperature of poured concrete can only be achieved through pre embedded temperature measurement lines. Pre embedded temperature measurement holes can also be used, but it is not as convenient as directly pre embedded temperature measurement lines. Moreover, the data obtained from pre embedded temperature measurement holes is not as accurate as pre embedded temperature measurement lines, and the impact of pre embedded temperature measurement holes on the strength of concrete structures is relatively large. Generally, pre embedded temperature measurement lines are recommended for temperature measurement in engineering projects.

Portable concrete thermometer: Five digit digital display, temperature measuring metal rod up to 40mm, high-precision temperature measurement. The standard specification for the temperature measuring wire is 0.5-5m.

Temperature measurement range:- 30℃～150℃
Temperature measurement error: ≤ ±0.3℃
Resolution: 0.1 ℃
Operating environment temperature:- 20℃～60℃
Display mode: LCD screen
Power supply: DC9V6F22
Weight: 200g
Host volume: 132X72X32mm

Computer remote control large volume concrete thermometer: wireless signal transmission distance of 1km, equipped with 10 20m temperature measuring wires.

Key points for operating a large volume concrete thermometer:
1. Select appropriate temperature measuring wires according to the number and depth of temperature measurement points. The temperature measuring wires are pre embedded with steel bars as supports. First, tie the temperature measuring wires to the steel bars. The temperature sensing elements of the temperature measuring wires should be located at the temperature measuring points and should not be in direct contact with the steel bars.
2. Before pouring concrete, insert the steel bars with temperature measuring wires tied in place into the concrete, leave the plugs outside, and cover them with plastic bags to avoid moisture and keep them clean. For ease of operation, the length of the temperature measuring wires left outside should be greater than 20cm, and they should be tied in order of top, middle, and bottom.
3. When conducting wireless temperature measurement: Insert the temperature measurement cable plug left outside into the wireless collector socket, and the wireless thermometer host can display the temperature of each measuring point simultaneously. When conducting wired temperature measurement: Press the switch of the thermometer host, insert the plugs of each measuring point into the host socket in sequence, and the corresponding measuring point temperature will be displayed on the host screen.
4. Carefully record and analyze temperature measurement data, and promptly report the results to the commissioning unit.
Technical parameters of large volume concrete thermometer:
1. Temperature measurement range:- 50℃—120℃
2. Equipment working environment temperature:- 20℃—60℃
3. Temperature measurement points: 32 channels
4. Sensor connection length: 50 meters
5. Power Supply: Terminal 220V/AC, Backup Power Wireless Host DC5V
6. Communication method: Local USB communication, original wireless LAN communication
7. Collection interval: 1-99 minutes
8. Test accuracy: 0.5 ℃
9. Wireless transmission distance: line of sight 1km-8km optional. (Usually 1km, other reservations)

Concrete temperature measurement line: can be customized according to user requirements, with conventional specifications ranging from 0.5-5 meters and special specifications exceeding 5 meters. Original imported sensor.