Product Introduction:

MG268S-H type is a high gloss board; MG268S-M type is a medium gloss board; MG268S-L is a low gloss board

Specification: 45mm × 85mm

Annual variation ≤± 0.5 gloss unit

The working face of MG268S-H type has an interference aperture of no more than 15 apertures and a local aperture of no more than 3 apertures

effect:

Used for the calibration of glossiness meters.

matters needing attention:

During the operation, the entire set of instruments should be kept clean. Otherwise, it will cause measurement errors and inaccurate calibration

If there is fog, dust, or stains on the surface of the work board, please use lens paper or a soft cloth dipped in anhydrous ethanol to wipe it clean

The measuring port of the instrument should be in contact with the measured surface to avoid external light leakage. If necessary, black cloth or other objects can be used to block the light around the measuring port

Suggest avoiding strong light environment measurement

Calibration, measurement, or verification operations should be carried out at the same ambient temperature, otherwise a large temperature difference in the environment will cause digital offset

If the MG6 series glossiness meter is not used for a long time, the battery should be removed to avoid corrosion and damage to the instrument

If the WGG60 series glossiness meter is not used for a long time, the internal battery pack should be recharged with an appropriate amount of electricity every month.