Gel filling machineIn terms of external structure, it can be divided into two parts: the pipe management machine and the filling machine. The outer jacket is sorted and enters the pipe management turntable. When the pipes to be filled are sent to the filling machine by the conveyor belt, the working mechanism sends the pipes to the main working turntable. The photoelectric detection sensor detects whether the gel tube to be filled exists, which is used to decide whether to fill (with tube, without tube, no filling). The filling gun automatically moves down into the tube, and gel is automatically injected into the tube. The caps are sorted by the automatic cap dropping mechanism and enter the automatic cap dropping station in sequence. After the discharge station is completed, the finished products are filled and outputted.

The machines produced by our factory are suitable for antibacterial contraceptive gel liquid condoms, female invisible condoms, water-soluble moisturizing antibacterial disease prevention HPV contraceptive suppository film external use contraceptives, including gel combination machine, gel filling capping machine, etc., which comply with GMP certification, help make up the font size to eliminate the font size, help eliminate the font size upgrade.

The gel filling machine is designed by our company from Japan and Germany. This gel filling machine integrates mechanical, pneumatic and automatic functions. It has the characteristics of high automation, high yield, and good stability, and has therefore been favored by a large number of users. The current models are more and more perfect and mature. With its high technical content, good adaptability, excellent quality and other characteristics, they are ideal special equipment for gel manufacturers!

This machine has the functions of automatic bottle detection, automatic bottle sorting, positioning, correction (filling with bottles, no filling without bottles), and cap pressing. At the same time, it is particularly suitable for domestically produced materials with large errors and various shaped bottles. Compared with similar filling machines abroad, the functional advantages of this machine are more obvious.

Gel filling machineIntroduction:

The gel pusher filling machine can be divided into two parts in terms of shape and structure: the pipe management machine and the filling machine. After finishing, the outer jacket enters the pipe management turntable. When the pipes to be filled are sent to the filling machine by the conveyor belt, the working mechanism sends the pipes to the main working turntable. The photoelectric detection sensor detects whether the gel tube to be filled exists, which is used to decide whether to fill (with tube, without tube, no filling). The filling gun automatically moves down into the tube, and gel is automatically injected into the tube. The cap is sorted by the automatic cap dropping mechanism and enters the automatic cap dropping station in sequence. There is a discharge station to complete the output of the final filled product. The gel putter is the first product of our company, which is the best product for treating gynecological diseases and preventing AIDS. Welcome to call or write to us, and we also welcome you to visit our factory for on-site inspection.
In addition, users need to equip their own compressed air system; The standards are as follows: pressure ≥ 4Kg/cm2 (kg/cm2), flow rate 0.11m3/min (m3/min). It is particularly emphasized here that compressed air must have been filtered and purified before entering the machine.

Function Introduction:
The gel push rod filling machine can be divided into casing and push rod assembly machine and filling host in terms of shape and structure. Contains functions such as inlet, detection, filling, and outlet.
1. Manually place the jackets separately into the jacket shaker, and after sorting, the jackets enter the filling host.
2. Photoelectric detection station, used to determine whether to fill (with tube filling, without tube filling).
3. Filling station: When the ointment (gel) tube arrives at the filling station, if the previous photoelectric detector detects that there is a tube, that is, when filling is allowed, the internal chip sends a filling signal.
4. Automatic lid dropping station: The caps are sorted by the automatic lid dropping mechanism and enter the automatic lid dropping station in order. Similarly, based on the signal detected by the photoelectric sensor earlier, if the detection signal indicates that there is a tube on the station, the internal control chip will control the upper cylinder to drop a cap onto the pipe mouth.
5. Discharge station: This station completes the output of the final filled product, and the product slides off the inclined track by the blocking effect of the sliding rod.
6. The final filled tube is sent out by the outlet conveyor belt.
Note: We specially designed and manufactured a filling rotary valve to control the filling volume well, aiming at the fact that ointment (gel) is different from other liquid medicines and has a certain viscosity, so the poor fluidity brings certain difficulty and particularity to the filling.

(1) Number of filling heads: 2

(2) Number of lower cover heads: 2

(3) Number of gland heads: 2

(4) Suitable bottle type: according to customer samples (different bottle types require replacement of chuck)

(5) Filling capacity: 3-10 milliliters

(6) Filling form: servo driven piston quantitative filling

(7) Cover form: Electromagnetic vibration disc (different specifications require replacement of vibration disc and guide rail)

(8) Lower cover form: Pneumatic lower cover

(9) Sealing form: Pneumatic sealing

(10) Production speed: 900-1500 bottles/hour

(11) Filling accuracy: ± 1%

(12) Overall power: approximately 2KW

(13) Program control: PLC combined with touch screen human-machine interface

(14) Material: The rack is made of 304 # stainless steel

(15) Material of liquid contact parts such as filling nozzle: 304 # stainless steel

(16) Air pressure: 0.6-0.8MPa

(18) Power supply: AC220V, 50/60HZ