GZCooling fan for cement kiln shell

Cylinder axial flow fan, also known as cement rotary kiln cooling axial flow fan or cylinder cooling fan, is a specialized axial flow fan for cooling the rotary kiln cylinder in cement plants. It consists of a trolley, a bracket, a fan, a direction adjustment device, an air duct, and a nozzle. Mainly used for cooling the kiln body during the combustion of cement clinker in the cement industry, and can be used for cooling other rotary kilns. This fan is a movable air cooling device.

The fan can move freely or be placed on a pre laid track. By adjusting the blowing angle during operation, it is usually necessary to10Only above the stage can a uniform and good cooling effect be achieved on the cylinder.
The fan power requirement is three-phase AC power380V、50HZEquipped with dedicated transmission line racks or mobile cables.
Before operation, check if all connecting parts are tightened and remove foreign objects from the flow channel. Turn the fan impeller, do not
There is a rubbing phenomenon. The temperature of the blowing medium shall not exceed60℃The dust content is not greater than150mg/m3,No diameter1mmThe above impurities are non explosive and non corrosive to facilitate the normal operation of the fan. If any abnormalities are found during the use of the product, immediate maintenance should be carried out. In addition, it is necessary to regularly remove impurities such as dust and dirt inside the fan.

GZPerformance parameter table of cooling fan for cement kiln barrel