Product Introduction:

The GXS series rotary flash dryer is powered by hot air entering the bottom of the dryer through a tangent line, and forming a strong rotating wind field under the drive of a stirrer. The paste like material is fed into the dryer by a spiral feeder, and under the strong action of high-speed rotating stirring blades, the material is dispersed by impact, friction, and shear forces. The block like material is quickly crushed, fully contacted with hot air, heated, and dried.

working principle:

Hot air enters the mixing and crushing drying chamber from the bottom of the dryer at a suitable spraying speed through the inlet pipe, generating strong shear, blowing, and rotating effects on the material. As a result, the material is subjected to centrifugation, shear, collision, and friction, and is atomized, enhancing mass and heat transfer. At the bottom of the dryer, larger and wetter particle clusters are mechanically crushed under the action of the agitator. Particles with lower moisture content and smaller particle size are carried up by the rotating airflow and further dried during the upward process. Due to the rotating flow of gas-solid phases, the inertia of the solid phase is greater than that of the gas phase, and the relative velocity between the solid and gas phases is higher, which enhances the mass and heat transfer between the two phases. Therefore, the drying intensity of this machine is high.

Technical parameters: