VIP member
GENTEC P3400 series automatic switching special gas control panel from the United States
GENTEC P3400 series automatic switching special gas control panel from the United States
Product details
Applied to the depressurization and gas supply of bilateral high-pressure gas cylinders, continuous gas supply is achieved through automatic switching, with blowing function.
The maximum input pressure can reach20.7 MPa (3000 psi)Corrosion resistance, clean workshop assembly testing, suitable for high-purity gas use in laboratories, gas analysis, etc.
Structural characteristicsFeatures
hSpecial gas series pressure reducer
hEquipped with safety valve
hThe pressure reducer and pipeline have undergone pressure and leakage tests
h2”Stainless steel pressure gauge with clear reading
hAll diaphragm valve knobs are equipped with an "open/close" indicator window
Technical ParameterSpecifications
hMaximum intake pressure:3000, 2200 psi
hMaximum exhaust pressure: two5, 50, 100, 150, 250 psi
hWorking temperature:-40 ~ 74°C (-40 ~ 165°F)
hTraffic: see traffic curve chart
hLeakage rate of pressure reducer:2 x 10-8 atm.cc / sec He
hCv: 0.14
Structural materialsMaterials of Construction
hPressure reducer body: stainless steel
hValve seat of pressure reducer:PU, PTFE, PCTFE
hPanel intake connection:1/4” Genlok®, 1/4” FSR, 1/2” FSR
hPanel air outlet connection:1/4” Genlok®, 1/4” FSR
hDiaphragm valve body: stainless steel
P3400Series automatic switching low-pressure special gas control panel
Applied to the depressurization and gas supply of bilateral low-pressure gas cylinders, continuous gas supply is achieved through automatic switching, with blowing function. Maximum input pressure3.5 MPa (500 psi)，
Corrosion resistance, clean workshop assembly testing, higher flow coefficient, especially suitable for the use of gases such as ammonia and acetylene.
Structural characteristicsFeatures
hSpecial gas series pressure reducer
hEquipped with safety valve
hThe pressure reducer and pipeline have undergone pressure and leakage tests
h2”Stainless steel pressure gauge with clear reading
hAll diaphragm valve knobs are equipped with an "open/close" indicator window
Technical ParameterSpecifications
hMaximum intake pressure:250, 500 psi
hMaximum exhaust pressure:25, 50, 100, 150 psi
hWorking temperature:-40 ~ 74°C (-40 ~ 165°F)
hTraffic: see traffic curve chart
hLeakage rate of pressure reducer:2 x 10-8 atm.cc / sec He
hCv:0.2
Structural materialsMaterials of Construction
hPressure reducer body: stainless steel
hValve seat of pressure reducer:EPDM
hPanel intake connection:1/4” Genlok®, 1/4” FSR, 1/2” FSR
hPanel air outlet connection:1/4” Genlok®, 1/4” FSR
hDiaphragm valve body: stainless steel
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-