VIP member
GCAN-PLC-510 plug-in expandable PLC
GCAN-PLC-510 is a programmable logic controller (PLC) with integrated bus control function. It not only has the characteristics of simple appearance a
Product details
GCAN-PLC-510 is a programmable logic controller (PLC) with integrated bus control function. It not only has the characteristics of simple appearance and high cost-effectiveness, but also can be easily connected to CAN bus systems and Modbus systems, and can be expanded through module plug-in. The GCAN-PLC-510 series products consist of a programmable main control module (GCAN-PLC-510, etc.), several GC series IO modules, and a terminal resistor module (GC-0001). GCAN-PLC-510 and other main control modules can connect to all GC series IO modules. Users can choose to expand IO modules according to their actual needs on site. With sufficient power supply, the maximum number of IO modules can be expanded to 32. The main control module can automatically allocate addresses according to the front and rear positions of the inserted IO modules, achieving automatic configuration. Users do not need to create a configuration interface or set parameters on the PC.
1 CAN bus interface, 1 Ethernet interface, and 1 RS232/485 (multiplexed) serial interface;
●Programming software: OpenPCS (programming language compliant with IEC 61131-3 standard);
●Support CANopen protocol master/slave station function;
●Supports Modbus RTU/TCP master/slave functionality;
●The maximum number of expandable IO modules (up to 32x8 DI/DO points) is 32 when the power supply is sufficient (with the addition of extended power modules);
●By default, send 4 PDOs (CANopen) and receive 4 PDOs (CANopen);
●The configuration mode is in the form of automatic configuration;
●The power supply adopts 24V DC (18~30V);
●The maximum input current is 400mA (total GC bus current);
●Starting current: approximately 2.5 times the continuous current;
●Power contact: Maximum 24V DC;
●Electrical isolation is 1500 Vrms;
●Working temperature range:- 40℃~+85℃；
●Protection level: IP20；
●Programming software: OpenPCS (programming language compliant with IEC 61131-3 standard);
●Support CANopen protocol master/slave station function;
●Supports Modbus RTU/TCP master/slave functionality;
●The maximum number of expandable IO modules (up to 32x8 DI/DO points) is 32 when the power supply is sufficient (with the addition of extended power modules);
●By default, send 4 PDOs (CANopen) and receive 4 PDOs (CANopen);
●The configuration mode is in the form of automatic configuration;
●The power supply adopts 24V DC (18~30V);
●The maximum input current is 400mA (total GC bus current);
●Starting current: approximately 2.5 times the continuous current;
●Power contact: Maximum 24V DC;
●Electrical isolation is 1500 Vrms;
●Working temperature range:- 40℃~+85℃；
●Protection level: IP20；
Used for water level control monitoring, water level control alarm, water flow monitoring, water temperature monitoring, vehicle passing detection, traffic signal light control, wind speed monitoring, windmill speed monitoring, voltage monitoring, current monitoring, factory automation, remote monitoring, data acquisition, smart home systems, gantry cranes, tire recycling systems, laser cutting machines, tire refining equipment, microwave dryers, sewage pumping stations, natural gas cutting, natural gas additive equipment, automatic punching machines, automatic brick coding machines, stamping machines, filter presses, water tank drawing machines, drawing machines, intelligent crimping machines, greenhouse constant temperature systems, quantitative loading systems, film cutting machines. Used for extruders, cotton textile machines, variable temperature air conditioning, automated papermaking Used for water supply automation, intelligent irrigation of water and fertilizer, cement production, ultraviolet sterilizer, polyurethane sprayer, textile machinery industry, crane industry, elevator industry, power industry, petrochemical industry, municipal industry, chemical industry, construction industry, machine tool industry, plastic industry, rubber industry, automobile industry, injection molding machine, bookbinding machine, electroplating assembly line, circular motion control, linear motion control, boiler control, matrix operation, function operation, logical operation, data transmission, data conversion, generator control, sorting, table lookup, lighting control, position operation, general machinery
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-