1、 Fully automatic reverse osmosis pure water equipment,Overview of Reverse Osmosis Water Purification Equipment

Green Health Water Treatment Company'spure water equipmentManual flushing and automatic operation can be customized according to user needs, as well as fully automatic flushing and operation. The automation of pre-treatment can use integrated fully automatic control valves, as well as electric valves or pneumatic valves. The former is mainly used for small systems, while the latter is used forLarge scale pure water systemThe control of reverse osmosis adopts fully automatic relay, orPLCProgramming for fully automatic control.

2、 Fully automatic reverse osmosis pure water equipment,Technical parameters of reverse osmosis water purification equipment:

Raw water: tap water/groundwater

Inlet pressure:0.2~0.3MPa

Operating pressure:0.3~1.5MPa

Control: Fully automatic control

Process: Reverse osmosis membrane separation

Size:5000mm*800mm*2200mm

Water production:6T/H(Equipment with different sizes of water production based on water demand)

Conductivity of water production:10us/cm

Application scope: domestic drinking water, circuit board cleaning, electroplating cleaning, desalination water for power plant boilers, etc

3、 Fully automatic reverse osmosis pure water equipment,Process flow of reverse osmosis water purification equipment

1. Raw water pump

The raw water pump is used to provide raw water pressure for the raw water pretreatment system. If the raw water has pressure, this equipment can be omitted. General requirement for raw water pressure>=0.3MP.

2. Raw water tank

The function of the raw water tank is simpler, it is used to store raw water. This is because we are afraid that if the raw water cannot be supplied, it will serve as a transfer.

3. Fully automatic quartz sand filter

This device is mainly used to filter microorganisms and dust in water to achieve clarity in the raw water.

4. Fully automatic activated carbon filter

This device is mainly used to filter residual chlorine in water, otherwise residual chlorine will oxidize the reverse osmosis membrane.

5. Dosing system(Cation exchange system)

Previously, this system was a cation exchange system, but it was very difficult and labor-intensive to operate. Now it is changed to adding scale inhibitors directly into the dosing system.

6. Precision filter: intercepting front-end larger than5umResidual particulate matter

7. High pressure pump: providing sufficient power for reverse osmosis water production

8. Reverse osmosis equipment: removes metal ions and other salts from water to achieve pure water quality

four、Fully automatic reverse osmosis pure water equipment,Performance of reverse osmosis water purification equipment

1. Front end5μMicro filters protect high-pressure pumps and reverse osmosis membranes from damage caused by particles or other hard objects.

2. The low voltage switch protects the high voltage pump from damage due to water supply interruption.

3. EfficiencytallLow noise high-pressure pump reduces operating noise and electricity consumption.

4. The roll type composite membrane with high desalination rate and low operating pressure improves the quality of produced water and reduces operating costs, and has a long service life.

5. Both produced water and concentrated water are equipped with flow meters to monitor and adjust the operating water output and system recovery rate.

6. The conductivity meter continuously monitors the quality of the produced water.

7. The inlet and outlet pressure gauges continuously monitor the pressure difference of the reverse osmosis membrane and indicate when cleaning is needed.

8. Quickly flush the valve and regularly flush the membrane surface. Reduce the speed of pollution.