characteristic:

1. The equipment is designed according to GMP standards and made of stainless steel materials, which comply with food and drug standards;

2. Each department uses pipeline valves to regulate the return air and compensate for the air in the crusher chamber, resulting in good insulation during transportation;

3. The equipment operates in a fully sealed state, with no dust flying and no environmental pollution;

4. Can crush materials that are difficult to crush at room temperature, explosive, easily oxidized, easily melted, and have high oil content;

5. The crushing temperature can be adjusted, and selecting the crushing temperature reduces energy consumption.

6. There is a closed-loop circulation system inside to fully utilize energy and save energy consumption.

Principle:

By using a cold source to exchange heat with the material; Reduce the temperature of the material to a brittle state; The brittle material undergoes countless impacts, shearing, and friction in the crushing chamber through the crushing mechanism to become fine particles, and the fineness of the crushed material can reach micrometers (100-2000 mesh). The choice of coolant can be based on the performance of the material. For example, using liquid nitrogen as a refrigerant can achieve a cooling temperature of minus 196 degrees Celsius, and its cooling rate is very fast. It is the preferred coolant for certain materials that require rapid cooling and have low brittleness temperatures. For materials that do not require a high cooling embrittlement temperature, compressed air or pre cooled air from an air conditioner can be used to exchange heat with the material.

Purpose:

The cryogenic crusher adopts external media freezing method, which solves the problem of crushing materials that cannot be crushed at room temperature by freezing the crushed materials with external materials. It can also be applied in fields such as maintenance and explosion prevention. This machine exchanges heat with materials through cold sources such as liquid nitrogen, compressed air, and air conditioning.

Parameters:

Note: 1. Motor power can be adjusted according to material properties, etc;

2. The external dimensions can be adjusted according to the height of the site;

3. Larger or smaller models can be customized according to requirements.