Erichsen510MC electric coating features:

The thickness of the coating is determined by the applicator.
This * * * uses a corrosion-resistant membrane switch control panel to control the required operating parameters.
Using a stepper motor, the uniformity of the coating and the reproducibility of the results are extremely high.
● The replaceable platform can be used as a drying time record * * *.
Can be used with all ERICHSEN applicators.

Erichsen510MC Technical Specifications:
The maximum coating stroke is up to 400mm.
Ultra fine coating speed: 0.1-19.9 (adjusted at 0.1 mm/s)/20-100 (adjusted at 1 mm/s) mm/s. The test paper can be clamped onto a glass plate or a vacuum suction cup can be purchased separately, which can be equipped with a heating platform.
The replaceable work surfaces include glass flat plates, groove type vacuum suction cups, hole type vacuum suction cups, and film specific vacuum suction cups.
The controllable temperature of the heating platform is from room temperature to 140C, with an adjustment interval of 0.1C.
The speed recorded during the drying process is: 0.1-19.9/20-108 min/cm. (last for 3 days)
Built in vacuum breaking kit.