dust cover
Our company produces vibration components: anode vibration hammer, cathode vibration hammer, hammer head, vibration drill, clamp, dust cover, dust cover, upper and lower fork, anode gear plate, cathode gear plate, coupling joint, cathode drive shaft, vertical shaft support plate, bearing seat, dry grinding dust bearing, vertical shaft bearing, center dust bearing, dust bearing, three wheel vertical bearing, four-wheel vertical bearing, four-wheel dust bearing, impact head, dust bearing limit, etc.
The working principle of pulse jet bag filter: When the dusty air passes through the filter bag, the dust is trapped on the outer surface of the filter bag, and the purified gas is discharged from the upper part through the inner tube of the funnel. A spray pipe is installed above each row of filter bags, and nozzles corresponding to each filter bag are installed on the spray pipe. A pulse valve is installed at the front end of the spray pipe, and the opening and closing of the pulse valve is controlled by a program control mechanism. When the pulse valve is opened, compressed air is ejected at high speed from the nozzle. Enter the filter bag through the Venturi tube with induced air that is 5-7 times larger than its own volume. The rapid expansion of the filter bag causes impact vibration, causing dust attached to the outside of the filter bag to fall off.