This product meets the requirements of GB 2423.1-2001 GB 2423.2--2001 、GB 2423.2、3--2001GB 2423.2、 National standards such as 4-2001

Direct sales manufacturer of explosion-proof and high-temperature aging test box for battery charging and discharging

And the requirements of other relevant standards. Strictly design and manufacture according to the technical conditions of GB 10592-89 high and low temperature test chambers, and can meet the military standard test requirements GJB150.3-86, GJB150.4-86， And non-standard production of various high and low temperature environmental tests.Used for the physical changes of electronic and electrical components, automation parts, communication components, automotive parts, metals, chemical materials, plastics and other industries, BGA, PCB substrates, electronic chip ICs, semiconductor ceramic magnets, and polymer materials. It tests the repeated tensile strength of materials at high and low temperatures, as well as the chemical changes or physical damage caused by thermal expansion and contraction of products, to confirm the quality of products. From precision ICs to heavy mechanical components, it is an ideal test for all.

Performance of High and Low Temperature Damp Heat Test Chamber Equipment

Internal dimensions 400 * 400 * 500mm

External dimensions (approximately) 670 * 1120 * 1500mm

Temperature range -40 ℃~150 ℃ (air-cooled)

Humidity range 20%~98% RH (programmable)

Cooling rate 20 ℃~-40 ℃/50 min (under no load)

Heating rate 0 ℃~+100 ℃/30 min (under no load)

Temperature stability ± 0.5 ℃

Humidity stability ± 2.5% RH

Temperature deviation ± 2.0 ℃

Humidity deviation ± 2.5% RH

Structural Design

Inner and outer box material testing area inner box stainless steel plate (SUS # 304), stainless steel.

High brightness external box lighting source

The design of the isothermal layer structure effectively avoids condensation at the top of the box,

Observation window for sample usage (W * L 28 * 35 cm),

Window anti sweat design adopts electric heating device to prevent water vapor condensation (40 W),

The test hole can be used for external testing of power cords and signals (5.0 cm),

The position of the machine pulley is adjusted by moving the pulley and fixing it with a strong bolt (200kg/wheel),

Thermal insulation layer, fire-resistant PU insulation layer+thermal insulation glass wool (insulation layer thickness 10.0 cm),

The tray rack inside the box can be adjusted to accommodate two stainless steel strip trays (with each tray measuring 5.0 cm)

The box door adopts double insulation and air tightness to effectively isolate external temperature leakage