VIP member
Digital speed measurement high-speed centrifuge
TGL-16a Digital Speed Measurement High Speed Centrifuge I. Product Introduction Electric centrifuge is a conventional laboratory centrifuge widely use
Product details
TGL-16aDigital speed measurement high-speed centrifuge
1、 Product Introduction
Electric centrifuge is a conventional laboratory centrifuge,Widely used in scientific research, education, and production sectors such as biology, chemistry, and medicine.Suitable for radioimmunoassay and separation of cells and large particles,There are two types: timed and unscheduled.
2、 Main technical parameters
| Model number | Zui High Speed | Capacity | The largest relative centrifugal field | time range | Working power supply |
| 80-1 80-2 | 4000r/min | 20ml×6 20ml×12 | 1795×g | 0-60min | exchange220V、 50HZ |
| 800 YXJ-1 | 4000r/min | 20ml×6 | 1435×g | not have 0-60min | exchange220V、 50HZ |
| YXJ-2 TGL-16 | 16000r/min | 1.5ml×12 | 17000×g | 0-60min | exchange220V、 50HZ |
3、 Safety Notice
It is strictly prohibited to operate without a rotating head without load;Before operation, check whether the rotor is corroded or damaged;Do not touch the rotating head while it is running;It is strictly prohibited to turn the head and operate in an unbalanced loading state.
4、 Instructions for use
The worktable of the centrifuge should be flat and sturdy,The workspace should be neat and clean,Dry and well ventilated,Environmental temperature5-32°CIs appropriate.Turn on the centrifuge and wipe the inner cavity and rotor clean.Test tube for weighing *,Close the centrifuge cover,Adjust the speed control knob,Increase the required rotational speed.Before each shutdown,The speed control knob must be placed in the smallest position possible.“timer”place“zero”Turn off the power switch,Cut off the power supply.Wipe the inner cavity and rotating head,Close the centrifuge cover.
5、 Maintenance and upkeep
Do not place any objects on the centrifuge cover.After each use,Be sure to clean and wipe the inner cavity and rotary head,Cover the centrifuge lid to prevent dust,Dirt entering.If the centrifuge has not been used for a long time before being reused,The centrifuge cover should be opened for a period of time,Dry inner cavity.The carbon brush of the motor is in use3000After hours,Should be replaced promptly,To prevent wear and tear on the rectifier.Centrifuge has been used for a long time,Natural wear and tear is a normal phenomenon.After one year of use,If there is a malfunction or difficulty encountered,Our company will continue to provide high-quality services,Provide assistance in handling.
metalsTanshi City
www.17
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-