Digital dial gauge

ID-F ABSOLUTE DigimaticDigital dial gauge

543 series - LCD display with backlight

characteristic:

• Due to the use of ACCOLUTE linear coding technology, once the measurement reference point is set, it will not be lost as long as the power supply is uninterrupted
• By setting upper and lower tolerances for GO/± NG judgment, when the judgment result exceeds the tolerance, the backlight display changes from green to red.
• Simulated poledial indicatorEquipped with a handle for upper and lower limit contact and zero point contact. heredial indicatorCompared to pointer baseddial indicatorEqually easy to operate. The display range of the analog pole can be changed.
• Equipped with SPC data output.

Digital dial gaugeTechnical Parameter

• Accuracy: Refer to performance parameters (excluding quantization bias)
• Resolution: 0.01mm/0.001mm or. 00005 ″/. 0001 ″/. 0005 ″/. 001 ″/0.001mm/0.01mm
• Display: LCD display
• Length standard rod: Absolute electrostatic capacitive linear encoder
• Maximum reaction speed: unlimited
• Force measurement: 1.8N/2.3N * or less (* measurement range of 50mm model) Shaft sleeve outer diameter: 8mm (ISO/JIS type) or 3/8 "(ANSI/AGD type)
• Measuring needle: Hard alloy ball with M2.5 * 0.45 thread (ISO/JIS type) or hard alloy ball with # 4-48NDF thread (ANSI/AGD type)
• Power supply: 9V DC (via AC adapter)

Digital dial gaugeFunction:

• Origin setting/pre adjustment, zero adjustment, GO/± NG judgment, maximum/minimum value retention, jump measurement, resolution conversion, counting direction conversion, automatic power on/off, data output, imperial/metric conversion (imperial/metric type)
• Warning: Low voltage, calculation error code, overflow error, tolerance limit setting error

option

936937: SPC cable (1m)

965014: SPC cable (2m)

21EAA131: RS-232C cable (2m)

540774: Spindle lifting cable (stroke: 10mm ）

02ACA571: Additional Spindle Spring for 25mm/1 "Models*

02ACA773: Additional Spindle Spring for 50mm/2 "Models*

264-504: Digimatic Mini Processor DP-1VR

543-004: Digimatic pre regulator

215-154: Granite comparator stand

215-504: comparator stand

215-821: comparator stand

application

Difference/jump measurement

Example: The dial gauge is moved from point A to point D

Difference (or total overflow) display A size, B (maximum value) and C (minimum value) can be sequentially called up through simple buttons.

Metric type

*To distinguish the AC power supply voltage, add the following suffix after the item number: A is suitable for 120V, K is suitable for 100V, D is suitable for 220V, E is suitable for 240/220V, DC suitable for China, no suffix suitable for 100V

Imperial/metric system