Desktop cyclotron constant temperature oscillator/Cyclotron Constant Temperature Oscillator Model: H/DDHZ-300

Product model name
Technical parameters DDHZ-300Desktop cyclotron constant temperature oscillator
Oscillation frequency 40-300 revolutions per minute
Amplitude 26mm
Capacity 500ml * 12 or 250ml * 15 (triangular bottle) or spring mesh rack
Tray size (mm) 500 * 340
Timing range 0-999 minutes
Constant temperature range: room temperature+5 ℃~60 ℃
Constant temperature accuracy
temperature uniformity
Digital display mode LED
Input power 300W
Dimensions (mm) 710 * 500 * 480
Weight 49kg
Power supply 220V 50Hz 3A
lighting
Note: The intelligent temperature controller used in this machine can be set by the user according to the instructions. The method one needs can improve the problems of overshoot caused by different climatic conditions in the north and south

Gas bath constant temperature oscillator/rotary constant temperature oscillator/rotary multi-purpose desktop constant temperature oscillator Model: HAD/THZ-82

1、 Introduction:

HAD/THZ-82 gas bath constant temperature oscillatorIt is a temperature controlled constant temperatureboxandMulti purpose speed regulationThe biochemical instrument combining oscillators is mainly suitable for the oscillation cultivation of various liquid and solid compounds such as biology, biochemistry, cells, and bacterial strains in scientific research departments such as universities, medical institutions, petrochemicals, health and epidemic prevention, and environmental monitoring.During the experimental process, it is often necessary to constantly shake the test solution to prevent precipitation or to compare two or more test solutions at a certain shaking speed and temperature. Using this instrument can achieve ideal results.

IITechnical parameters:

1Temperature control range: room temperature-50.0℃.

2Temperature control method: microcomputer PID control, PT100 sensor.

3Temperature control accuracy:1 ℃.

4Temperature fluctuation: 05℃.

5. Working size：420×360mm

6Speed range:40-300 revolutions per minute（Microcomputer control, speed error of 1 rpm）.

7. Oscillation mode: spiral type

8Timing range;Oscillation timing024 hours and 59 minutes or normally open

9. Heating power: 300W

10. Power supply: 220V 50Hz

3、 Usage:

1. Firstly, place the reagent bottle on the oscillation rack and clamp it with a spring. At this point, turn on the power supply, turn on the power switch, and the temperature controller will light up. Click the SET function button on the temperature controller to set the temperature. The upper row will display the set temperature, and the lower row will display sp. Click↑perhaps↓Key to adjust the required working temperature, if quick adjustment is needed, it can be done through←Press the key to quickly set. After setting, click the function key SET again. The timing time will be displayed in the upper row and st will be displayed in the lower row. Click↑perhaps↓Press the key to select the timer time. If no timer is needed, set the time to 0. Click the set key again to exit the setting state, and the temperature inside the box will run at the set temperature.

2Activate oscillationSwitch, click on the speed/time controller︽perhaps︾Select the oscillation speed with the key, and then clickMandHKey selection for timed time（Mminute,HHour), click after setting is completerunPress the key to start running. To stop, click on itstopJust press the key.

3. After use, turn off the power. If not in use for a long time, please unplug the power. If there are water droplets inside the box, please clean and wipe them clean in a timely manner to extend the service life.

4、 Attention:

1. When using this instrument, a three hole socket with safety grounding must be used,

2. In the case of high-speed oscillation, there will be a certain displacement, which needs to be monitored by a dedicated person or fixed on the ground with a fixed bracket.

Product related keywords: desktop rotary constant temperature oscillator rotary constant temperature oscillator