Instructions for using the 80-D digital speed measuring electric centrifuge

The 80-D digital speed measuring desktop electric centrifuge is a conventional laboratory centrifuge widely used in scientific research, education, and production departments such as biology, medicine, and chemistry. The maximum speed of the low-speed desktop centrifuge is 4000r/min, which is used for radioimmunoassay identification and separation of cells and large particles. It is safer and quieter with a stainless steel inner tank.

Technical parameters: Note: [Digital speed measurement is based on the number of times the rotor speed is displayed, not a constant speed]

2/SPECIFICATION:

2） 80-D desktop centrifuge safety instructions: Please read all user manuals before using the desktop centrifuge 80-5A.

1. Before starting work, the machine should be evenly placed in a hollow tube and run at high speed for 1-2 minutes. Only after finding no abnormalities can it start working.

2. It is strictly prohibited to touch the rotating head that is in operation.

3. It is strictly prohibited to turn the head and operate in an unbalanced loading state.

4. Damaged wires or plugs or electrical equipment malfunctions should be repaired by professionals. Using electrical equipment not recommended by the manufacturer may cause certain quality problems.

5. Do not use in direct sunlight.

6. Do not place this device near high-temperature heating elements.

7. The electrical rated parameters of the power socket provided by the user should be greater than the electrical rated parameters of the machine, and there should be good grounding measures.

8. It is strictly prohibited to move the machine while it is in operation.

9. Strong impact is strictly prohibited on this machine.

10. When replacing the fuse, the socket should be unplugged from the power source first.

11. When running, be sure to tightly cover the centrifuge cover to prevent objects from entering and damaging the machine.

12. Do not allow children to approach machines that are currently in use.

13. It is strictly prohibited to use metal cleaning materials for scrubbing. Soft cloth dipped in alkali should be used for scrubbing.

3） Instructions for using 80-D desktop electric centrifuge

1. The worktable of the desktop electric centrifuge 80-D should be flat and sturdy, with a neat and clean workspace, dry and well ventilated. Before starting up, the inner cavity and rotor should be wiped clean, and the corresponding test tube weighed in advance should be placed into the centrifuge hole.

2. Close the centrifuge cover, turn on the power, if there is a timer, set the time first, adjust the speed knob, and raise it to the desired speed.

After completing the work, the speed control knob must be adjusted to the minimum position, the timer set to zero, the power switch turned off, the power cut off, the rotor wiped, and the centrifuge cover closed.