DensFlow Concentrated Solid Mass Flow Measurement

Application:

DensFlowIt is a measurement system used to measure the flow rate of concentrated solid materials.

DensFlowMainly used for online measurement of the following working conditions:

• Various powders or particles

• Dense phase materials transported by pneumatic conveying

Mechanical conveying systems, such as chutes, chutes, or discharge pipelines

• High traffic

PRODUCT INFORMATION：

1 principle The material passes through the pipeline of the sensor, and its filling degree and velocity are detected by the sensor. Since the cross-section of the sensor is fixed, the flow rate is calculated by the formula: flow rate=Filling degree*speed*Cross sectional area, and finally the flow signal passes through the standard4-20mAsignal output

2 output

two-way4-20mAOutput, load resistance＜500Ω；

Relay maximum250AC，1A

3 system composition

A complete measurement system consists of the following units:

l Sensor measuring tubeDMS100,Used for installation on pipelines

l converterDME100

Converter through4Connect the shielded cable to the sensor

4、 Application examples

fuel delivery

Optimization of dense phase transportation

5、 advantage

Easy to install, no throttling components

Large range ratio

Within the measuring range, the measurement is not affected by fluctuations in material flow rate

The device is simple, easy to adapt to the installation conditions on site, and easy to maintain

maintenance-free

non-contact measurement

accuracy2%-5%

6、 install

Installation location: on pipelines in dense phase conveying systems and mechanical conveying systems

Connection method：Flange connection