YS-UP-I series deionized water machineProduct Features
1. It has functions such as power indication, pump operation indication, low voltage indication, and system flushing indication.
2. Adopting imported ion filtration membrane and high-pressure, silent pure water pump, the operating quality is more reliable and applicable to a wider range of water quality.
3. Equipped with system flushing function: Before starting up to produce water each time, the system will automatically flush for 30 seconds before starting to produce water.
4. Equipped with system protection function: When the water pressure is too low or there is no water, the equipment will automatically shut down, and when the water source comes in, the equipment will automatically turn on.
The UPT-I series ultrapure water machine has an online water quality monitoring function, which can monitor the inlet water quality (located above the instrument, near the function detection area, indicated by a digital tube), RO water quality and temperature, and pure water quality and temperature in real time.
YS-UP-I series deionized water machineTechnical Parameter
Water inlet requirements: Urban tap water: TDS<200ppm； Water pressure>0.1Mpa; Water temperature: 5-45 ℃
Pure water quality: Conductivity: 0.1us/cm (25 ℃)
PH value (25 ℃) requirement: none;
Technical requirements for oxidizable substances (calculated as O): ≤ 0.08mg/L； Test result: ≤ 0.08mg/L
Technical requirements for evaporation residue (105 ± 2 ℃): ≤ 1.0mg/L； Test result: 0.7mg/L
Inspection basis: GB/T6682-2008，
Technical specifications: Power supply/power 25W
Water production rate of 10L/h; 20L/h; 30L/h; 40L/h
Control system: Operating modes display power, water shortage, flushing, full water, inlet water quality monitoring, RO water quality, water temperature, UP water quality, water temperature, etc;
Safety performance: Automatically enter standby mode when there is no water or low water pressure, and enter standby mode when the system is full of water (constant pressure);
Purification system: external softening filter for pre-treatment unit (recommended for areas with high hardness of raw water); 1 μ m deep PP filter * 2+precision activated carbon filter
RO reverse osmosis unit: American original RO reverse osmosis membrane/membrane assembly;
Post purification unit: purification column
Standard configuration: Host+accessory package
Note: 1. The inlet water quality affects the outlet water quality and the service life of the filter column; 2. When the quality of the source water is poor (TDS greater than 200ppm), the RO pure water quality will drop to over 10 μ s/c ㎡; 3. When the TDS of the raw water quality is greater than 500, it is recommended to use a water softener
Partial names and models of pure water machines
Deionized pure water machine (water production rate 10L/h) YS-UP-I-10
Deionized pure water machine (water production rate 20L/h) YS-UP-I-20
Deionized pure water machine (water production rate 30L/h) YS-UP-I-30
Deionized pure water machine (water production rate 40L/h) YS-UP-I-40