Technical characteristics of sterile single arm double cone rotary vacuum dryer:

1. Install the tank in the sterile workshop, with the transmission components and brackets installed outside the sterile room, separated by a partition wall, and sealed with a silicone sealing ring on the partition wall to ensure normal operation and production in the sterile area.

2. The manhole cover on the tank body adopts a curved transition to avoid dead corners and material accumulation. The cover is equipped with a vibrating copper hammer to achieve the effect of anti sticking and vibrating material detachment.

3. Use steam or hot water heating and mechanical sealing with rotary joints to ensure no leakage during operation.

4. Adopting gear transmission to ensure smooth operation, adopting two-stage variable speed and variable frequency soft start to achieve adjustable speed.

5. Use three or more head metal sintered mesh to avoid the traditional phenomenon of filter bag detachment and sealing sleeve debris falling off, ensuring product quality, sintering, disassembly and cleaning.

6. Adopting double row angular contact ball bearings, the fixed points formed in this way are conducive to the smooth operation of the equipment and avoid traditional centering shaking; Adopting a single point fixation is beneficial for the free thermal expansion of the equipment.

7. The vacuum tube adopts single point double support, which is conducive to the fixation of the vacuum tube and prevents deformation of the vacuum tube.

8. Equipped with a cyclone separator, it can prevent material leakage due to misoperation and ensure the normal operation of the vacuum system.

9. Normal emptying should be carried out in a sterile room through a pipeline filter, but the emptying position should not be on the tank, but on the vacuum pipeline, and outdoor air should not be used.

10. Installing a hot water tank and pump on the bracket not only serves as a counterweight, but also saves space.

11. The tank is equipped with an on-site temperature gauge, which can be used to observe and regulate the temperature at any time.

12. The tank is equipped with vacuum loading and unloading ports, which can also serve as sampling ports for easy feeding and sampling.

13. Adopt two mechanical seals, one is vacuum seal and the other is condensate seal.

14. A metal expansion joint is installed on the vacuum pipeline to eliminate the deformation caused by thermal expansion of the equipment.

15. The manhole adopts a quick opening structure, which is convenient for operation, maintenance, cleaning, disinfection, etc.

Technical parameters of sterile single arm double cone rotary vacuum dryer: