DP 500 / DP 510Portable dew point detector with data logger
It is an ideal portable dew point measuring instrument.
3.5”The touch screen graphic display makes operation easier.
The color measurement curve displayed in the graph is *.
Measure the current dew point and display the dew point change curve. Can store up to1Billions of measurement values, dates, and measurement point names. The measured data can be obtained throughUTransfer the disk to the computer.
Data can be easily processed throughCSEvaluate the basic software. Measurement data and service reports can be easily and quickly published.
DP510Additionally, configure a further free allocation sensor input.
In addition to internal dew point measurement, another optional sensor can be connected, such as:
- Pressure sensor
- flow sensor ,VA400/420
- temperature sensorPT100,4..20mA
- Further dew point sensor
- Effective electricity meter
- Optional third-party use of the following signal sensors:0.. 1/10V, 0/4...20mA, Pt100,Pt1000,Pulse, network connectivity Message Protocol
Product Features:
- Accurate dew point measurement-80ºCtd
- Fast response time
- 3.5”Graphic display, easy to operate through touch screen
- Stored measurement values Using an integrated data logger
- pass throughUSBInterface reading
- Calculate all necessary moisture parameters for exampleg/m3,mg/m3,ppm,v/v,g/kg,ºCtdatm
- An assignable interface for third-party sensor access (only forDP510)
- :8More than one language to choose from
take in everything at a glance
Measurement curve graphic representation, allowing users to see the recorded data since the dryer started measuring at a glance.
All physical parameters for moisture measurement are automatically calculated
DP510The third-party sensor for measuring values also represents
It can store up to1Billion measurement values Each measurement can be annotated and stored, For example, the measurement point name and time interval can be freely set.
Technical Parameter:
Technical ParameterDP 500 |
|
---|---|
monitor |
3.5”Touch Screen |
measuring range |
-80 ... + 50 ºCtd -20 ... + 70 ºC 0 ... 100%RH |
accuracy |
±0.5 ºCtdexist -10...+50ºCtdLimit range ±2ºCtd |
Display units |
g/m3, mg/m3, ppmV, g/kg ºCtdatm, % RH |
Pressure Range |
-1...50 barstandard -1...350 barspecial version |
interface |
USBinterface |
data logger |
2GB SDMemory card(1Billion storage value |
power supply |
Internally rechargeable lithium battery Approximately sustainable operation12Hours, charging time is4An hour |
Screw in thread |
stainless steelG1/2” |
Ambient temperature |
0...50ºC |
chip |
DIN EN61326 |
application area:
- Air compression: refrigeration detection, membrane type.adsorption type dryer.
- Industrial gas: residual water content in gas for exampleN2,O2wait a minute
- plastics industry Surface drying machine inspection
- Compressed air for medical use, respiratory gas
DP 500/DP510
Flexibly record and transfer data through USB cable or USB drive
Storing measurement data can be easily transferred to a computer through a USB drive or via a USB cable.
You can freely choose to read any period of data.
The data can be evaluated in the form of charts using CS software.
CSBasic software can be selected5Evaluate data in multiple languages
Everything is clear at a glance:Tables, graphs, and statistics,Users will obtain all necessary information by touching and operating a button.
Chart evaluationAll measurements are represented by colored curves. All necessary functions,Such as zooming in and selecting a single measurement curve/Cancel selection, freely choose the time period,Expansion and contraction of the shaft,Choose colors, etc.
table view:List all measurements and precise time intervals. You can select the required measurement channel and measurement station name through graphics
statistics:All necessary statistical data is visible. Therefore, users can quickly view which smallest or largest measurement value occurred at which time and for how long.
DP 510Portable dew point meter (data logger and third-party sensor)
Instruments perform measurement tasks
DP 510Includes all DP 500 features and has an additional free allocation sensor input,In addition to internal dew point measurement, DP510 can also be connected to another optional sensor. So users can meet almost all industrial measurement tasks, such as:
Individual pressure measurement
Dew point distance is measured by an external temperature sensor
Measurement of Compressed Air Consumption
Effective power kWh/kW